Advertisement
PROBLEM
Is the Bellows Assembly properly
assembled?
There is leak-
age during
spinning.
The Brake Band touches the
Drum Coupling when the Door
Spin open.
Basket Spin
does not
stop with the
Door Spin
Is the electric connection of the
open
Door Switch good?
Concerning Drainage (Pump)
PROBLEM
PROBLEM
Is the height of the drainage area where
the Drain Hose hangs over 1m?
Are there impurities on the Drain
Strainer?
Drainage is
not satisfac-
tory
Are there impurities in the Valve
Housing or Inlet Joint?
14
CHECK POINT
NO
YES
YES
YES
CHECK POINT
CHECK POINT
YES
NO
YES
NO
YES
NO
CAUSE
Waterproofing not working
due to defective assembly.
The Waterseal or the
Oilless Metal in the Bellows
Assembly is worn out.
NO
Brake wire is too short.
Brake Band is worn out.
NO
Defective
Door Switch
The contact of the Door
Switch does not open due
to deformity of the lever of
Door Switch.
CAUSE
CAUSE
The Drain Hose is too high.
Impurities are obstructing
drainage.
Impurities are obstructing
drainage.
Impurities are blocking the
Drain Hose
SOLUTION
Re-assemble
Bellows Assembly.
Replace Bellows
Assembly.
Replace after loosening
LINK BRAKE and adjusting
upward.
Replace Brake Band or
Brake Fix Assembly.
Replace
Door Switch
Replace Door Switch or
reshape the lever of Door
Switch.
SOLUTION
SOLUTION
Hang the Drain Hose lower.
Remove out impurities on
the drain Strainer
Remove impurities or
replace Valve Housing or
Inlet Joint.
Remove impurities
Hide quick links:
Advertisement
