Advertisement
PROBLEM
Does the Gear Housing Shaft
Pulsator
rotate properly when the Pulsator
does not
has been disassembled?
rotate
smoothly.
Is the wiring of Wash condenser
properly connected?
Pulsator. only
rotates in one
direction.
Is the wiring of Wash Timer prop-
erly connected?
Are there strange noise from Tub
when the Pulsator rotate?
There is
excessive
noise during
Washing
Concerning Spin
PROBLEM
Is the Door Spin open?
The Basket
Spin does
Is there a whirring sound from the
not rotate.
Spin Motor when turned ON?
12
CHECK POINT
NO
YES
YES
NO
CHECK POINT
NO
NO
YES
CAUSE
YES
Worn out the Serration
within the Pulsator.
Defective Gear Housing
NO
Improper Connection
NO
Improperly Wiring
Defective Wash timer
YES
Impurites between Pulsator
and tub
NO
Pulsator improperly
assembled.
Something is in contact with
the Pulsator Pulley or Motor
Pulley or other rotating parts.
CAUSE
YES
The contact Door Switch is
open.
SOLUTION
Replace Pulsator.
Replace Gear Housing As.
Reconnect
Reconnect the Wash
Timer.
Replace Wash Timer.
Remove impurities after dis-
assembling Pulsator.
Tighten the Pulsator fixing
screw.
Adjust the parts so that
there are no impurities in
contact with rotating parts
SOLUTION
Keep the Door Spin closed
during spin.
Hide quick links:
Advertisement
