Advertisement
PROBLEM
The Brake Band is touching
the Drum Coupling Assembly.
NO
Is the Motor hot? (In case there is
Thermal Protector)
The Basket
Is the wiring good? (Refer to
Spin does
Wiring Diagram)
not rotate.
Is the Door Switch Lever properly
placed on the Door Spin?
Is the Door Switch terminal prop-
erly connected?
Is the Contact of Spin Timer good?
Is the wash load well balanced?
Are clothes or the Safety Cover
stick out from Basket Spin?
There are
strange
noise and
Is the assembly between the
servere
Drum Coupling Assembly and
vibration
Spin Motor or Basket Spin loose?
during spin-
ning.
Is the Basket Spin itself well balanced?
CHECK POINT
YES
NO
YES
NO
YES
YES
YES
YES
YES
YES
YES
YES
NO
YES
CAUSE
Brake wire is too long.
BRAKE SPRING is broken.
Power has been cut off by
the Thermal Protector
NO
Improper wiring
NO
Defective connection
Improper wiring
NO
Defective Spin Timer
Defective Spin Motor
NO
Basket Spin does not balanced
due to wash load.
NO
Basket Spin does not balanced
due to wash load.
Improper structural assembly
NO
Basket Spin unbalance
The Waterseal or the oil-
less metal in the Bellows
Assembly worn out.
SOLUTION
Assemble after loosening
LINK BRAKE and adjusting
downward.
Replace Brake Spring.
Power restored when motor
cools.
Reconnect wiring
Replace Door Switch or
reshape the Lever.
Reconnect the terminal.
Replace the Spin Timer.
Replace the Spin Motor.
Reload the clothes so they
are well balanced
Reload the clothes and
press down the Safety
Cover into Basket Spin.
Tighten the Bolt Drum
Coupling Assembly.
Replace Basket Spin.
Replace Bellows Assembly.
13
Hide quick links:
Advertisement
