LG WK2 S6 Series Owner's Manual page 54

OPERATION-DRYER
54
• Press and hold the Steam button for 3 seconds
before you start a drying programme.
NOTE
• Steam may not be clearly visible during the
steam programmes. This is normal.
• Do not use Steam Fresh with items such as
wool, wool blankets, leather jackets, silk, wet
clothes, lingerie, foam products, or electric
blankets.
Ahorro de Energía (Energy Saver)
This option helps to reduce the energy
consumption of the Normal programme,
depending on the load size. When this option is
selected, the programme begins with an air dry
section and the drying time is increased.
• Press the Ahorro de Energía (Energy Saver)
button before you start a drying programme.
Reducir Estática (Reduce Static)
This option injects steam late in the drying
programme to reduce the static electricity caused
by dry fabrics rubbing together.
• Press the Reducir Estática (Reduce Static)
button before you start a drying programme.
Anti Arrugas (Wrinkle Care)
Selecting this option will tumble the load
periodically for up to 3 hours after the selected
programme, or until the door is opened. This is
helpful in preventing wrinkles when you are unable
to remove items from the dryer immediately.
• Press the Anti Arrugas (Wrinkle Care) button
before you start a drying programme.
NOTE
• When the option is set, a rectangle with a dashed
line and appears on the display until the
ENd
feature is off.
• When the option is set, only the Power button
works after the drying programme ends.
• When a drying programme is running, pause the
programme first to set the option.
• Always turn off the appliance before unloading
the clothes.
Follow the next steps to use a special
option.
1
Press the Power button.
2
Select a drying programme.
3
Select the Steam, Steam Fresh, Ahorro de
Energía (Energy Saver), Reducir Estática
(Reduce Static), or Anti Arrugas (Wrinkle
Care) option.
4
Hold the Start/Pause button.
Settings
Bloqueo infantil (Child Lock)
Use this option to disable the controls. This
function can prevent children from changing
programmes or operating the appliance.
NOTE
• Once this function is set, all buttons are locked
except the Power button.
• When the controls are locked,
remaining time are alternatively shown on the
display during the wash while this function is
engaged.
• Turning off the power will not reset this function.
You must deactivate this function before you can
access any other functions.
Locking the Control Panel
1
Turn on the power.
2
Press and hold the Tiempo de Secado (Time
Dry) button for 3 seconds to activate this
function.
• A beeper will sound, and
the display.
Unlocking the Control Panel
1
Turn on the power.
and the
[L
will appear on
CL