OPTICLIMATE 6000 PRO4 SPLIT Operation Instructions And Installation Manual page 11

□ Press the <SET> again to complete the clock setting
3.8 Query (can display real time)
□ When the cycle timing (〖b7〗 is set to 1), press the <SET> to display the real time.
□ Press <SET> to enter the query, then press <△> or <▽> to query the values of d1, d2, d4, d6,
and then press <SET> to exit the query.
d1: Illuminance
d2: Indoor coil temperature
d4: Indoor temperature
d6: Humidity
3.9 Parameter settings
□ Press the <SET> for 9 seconds to enter the parameter setting menu
□ Press the <ON/OFF> to select [System Function Settings Menu], [Protection Temperature
Time Menu], [Defrosting parameter] or [Password Menu]
□ Press <△> or <▽> to select the setting item in the specific menu.
□ Press <+> <-> to adjust the specific parameters.
□ Press the <SET> button to store the data and exit.
3.10 System function settings
Parameter name
Control method
Model selection 1
Model selection 2
Unit Factory
number settings
(b0) 1(0-1)
(b1) 0(0-1)
(b2) 0(0-1)
http://www.hicoolopticlimate.com/
01
Light control
Cooling and
heating
Air-water-air
10
O0
External control
Cooling only
Air-air