Appendix A: Compliance Information - Accent ACN1400-30 User Manual

Appendix A: Compliance Information

Electronic Interference Information
This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
Warning! Changes or modifications to this product which are not authorized by PRC-Saltillo could exceed FCC
limits and negate your authority to use this product.
Note:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected.

Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe B respect toutes les exigences du Règlement sur le matériel brouiller du Canada.
Connectivity of Peripheral Ports
External equipment intended for connection to signal input, signal output, or other connectors comply with the
applicable standards of the IEC 60601 series. In addition, all such combinations—systems—comply with the IEC
60601-1 safety requirements for medical electrical systems. Any person who connects external equipment to signal
input, signal output, or other connectors has formed a system and is therefore responsible for the system to comply
with the requirements of IEC 60601-1. If in doubt, contact a qualified technician or your local representative.
Accent 1400 User's Guide 49