Removing Or Reattaching The Handle - Accent ACN1400-30 User Manual

Removing or Reattaching the Handle

If you want to remove the handle from the device, simply remove the two screws that hold it in place.
Remove screw Remove screw
®
Note: If you are not going to mount a NuPoint module, you will need to attach the port cover to protect
the Mini USB Connector. See "Attaching the Port Cover" on page 41.
To reattach the handle:
Remove the port cover, line up the holes in the handle with the holes on the back of the device, and
insert the two screws.
Accent 1400 User's Guide 40