4. Use the two tabs to snap the bottom of the
frame loose from the device.
Attaching the New Frame
You must attach the device frame before you can mount a keyguard or TouchGuide over the screen.
1. Line up the keyguard tabs with the slots on the
top of the device.
3. Pull out slightly on the sides of the frame.
Accent 1400 User's Guide
Tabs on bottom of frame
5. Lift out the tabs at the top of the device and
lift the frame off the device.
2. Press the tabs into the slots.
4. Push the sides down until they fit over the
edges of the device.
45