Replacing Or Removing The Bumper Guards - Accent ACN1400-30 User Manual

Replacing or Removing the Bumper Guards

Your Accent device shipped with bumper guards attached to all four corners of the device to provide
extra protection. Four larger bumper guards were also included. If you want to replace the bumper
guards, follow these instructions.
If you replace the bumper guards, be sure to secure them with the screws. Otherwise they can be pulled
loose, creating a choking hazard.
1. From one of the corners of the device, remove the mounting screw and the bumper guard.
2. Push the replacement bumper guard onto the corner.
3. Insert the mounting screw through the hole in the guard and into the hole in the device.
Note: Be sure to insert the same screw that you removed in step 1.
4. Tighten the screw.
5. Repeat steps 1 – 4 for the other three corners.
Accent 1400 User's Guide
Bumper Guards
Important! Save the screw. You will need it to
attach the replacement bumper guard (in step 3).
38