Troubleshooting - Sav NEO 2000 Operating Instructions Manual

SAV 531.01

7 TROUBLESHOOTING

7. TROUBLESHOOTING
The safety information from section 2 "Safety" must be observed.
DANGER!
DANGER!
The lifting magnet does not switch
Switching mechanism defective. Send the lifting magnet to SAV GmbH for repair.
■
The load does not adhere to the lifting magnet:
Holding force on the load too low, e.g. due to high-alloy materials. Observe the information in section 3
■
"Technical specifications".
Contact SAV service. Send the device for inspection if necessary.
■
Hazard from malfunction!
Incorrect assembly of the lifting magnet can cause a malfunction of the
magnet.
Loads can fall down and cause serious injuries and even death.
Have troubleshooting carried out only by qualified personnel.
■
The lifting magnet has to be set down securely or attached to the load.
■
Check after assembly!
Risk of crushing!
There is a risk of crushing limbs from tipping over or falling of the lifting
magnet due to incorrect installation and removal of the magnetic magnets.
Secure the lifting magnet against falling or tipping over.
■
To lift the lifting magnets, always use safety hooks that are designed for
■
the weight of the lifting magnets, so that the lifting eye cannot slip from
the hook.
Have troubleshooting carried out only by qualified personnel.
■
[
52
]
Version 1.0