Switching On - Sav NEO 2000 Operating Instructions Manual

SAV 531.01 5 OPERATION
5.1

Switching on

The lever is in the "OFF" position.
■
Place the lifting magnet onto the part to be lifted.
■
Fig. 7: Lever in the "OFF" position – pull out and turn the lever
Pull the lever from the spring-loaded safety block and turn the lever approx. 15° counter-clockwise.
■
Ensure that the lever is securely in the "ON" position before you start the lifting process.
■
Fig. 8: Lever in the "ON" position – ensure that the lever is locked.
The lever is in the "ON" position.
■
Lift the load by approx. 10 cm and check the holding force by shaking with the crane. Guide the load by the
■
corners.
CAUTION!
Transport the load and set it down in a stable position after the transport.
■
NOTE!
For the 150, 300 and 600 models, the lever does not have to be pulled out.
It is enough to turn the lever.
CAUTION!
Keep your distance and never move underneath the load!
[
48
]
Version 1.0