Switching Off - Sav NEO 2000 Operating Instructions Manual

SAV 531.01 5 OPERATION
5.2

Switching off

■
Fig. 9: Lever in the "ON" position – pull out and turn the lever
Pull the lever from the spring-loaded safety block to allow unhindered turning of the lever.
■
Turn the lever approx. 150° clockwise to the "OFF" position.
■
v
Fig. 10: Lever in the "OFF" position – ensure that the lever is locked.
Ensure that the lever is engaged before lifting the magnet from the load.
■
Version 1.0
NOTE!
Lighter loads may stay stuck to the lifting magnet!
[
49
]
EN