Automatic Programmes; Using The Accessories - AEG BPE742320M User Manual

The function stays on if you change the
heating function.
7.4 Time Extension
The function: Time Extension makes the
heating function continue after the end
of Duration.
Applicable to all heating
functions with Duration or
Weight Automatic.
Not applicable to heating
functions with the core
temperature sensor.

8. AUTOMATIC PROGRAMMES

WARNING!
Refer to Safety chapters.
8.1 Recipes online
You can find the recipes for
the automatic programmes
specified for this oven on
our website. To find the
proper Recipe Book check
the PNC number on the
rating plate on the front
frame of the oven cavity.

9. USING THE ACCESSORIES

WARNING!
Refer to Safety chapters.
9.1 Food sensor
The food sensor measures temperature
inside the food. When the food is at the
set temperature, the appliance
deactivates.
There are two temperatures to be set:
• the oven temperature (minimum 120
°C),
• the food core temperature.
CAUTION!
Use only the food sensor
supplied and the original
replacement parts.
1. When the cooking time ends, a
signal sounds. Press any symbol.
The display shows the message.
2. Press to turn on or
3. Set the length of the function.
4. Press .
8.2 Assisted Cooking with
Recipe Automatic
This oven has a set of recipes you can
use. The recipes are fixed and you
cannot change them.
1. Turn on the oven.
2. Select the menu: Assisted Cooking.
Press to confirm.
3. Select the category and dish. Press
to confirm.
4. Select a recipe. Press
Directions for the best results:
• Ingredients should be at room
temperature.
• Food sensor cannot be used for liquid
dishes.
• During cooking the food sensor must
remain in the dish and the plug in the
socket.
• Use recommended food core
temperature settings. Refer to "Hints
and tips" chapter.
The appliance calculates an
approximate end of cooking
time. It depends on the
quantity of food, the set
oven function and
temperature.
ENGLISH 15
to cancel.
to confirm.