Icom IC M802 Notes On Operation page 4

Modifications
Delete published procedure for Group Calls starting On Page 94
Insert:
Group DSC Call Procedure:
1. Press [DSC] button to go to the DSC WATCH display.
2. Press [ /MODE] button to go to the DSC MENU.
SET
3. NOTE: Press [
button to move back one menu screen.
4. Rotate [CH] knob to select Group
5. Press [ENT] button to display Group – Group ID menu
6. Select what Group the message will be sent to or
input a Group MMSI number.
a. Group Ids always start with a "0"
b. IF there are Group addresses pre-
programmed into radio
i. Rotate the [CH] knob to select the
ii. Press [ENT] button to continue to the Group – Traffic frequency menu.
c. IF no ID numbers are programmed or
manual entry was selected
i. Manually enter the desired nine digit
ii. Press [ENT] button to continue to the
/MODE] button at any time to cancel the procedure and [FREQ/CH]
SET
recipients Group MMSI.
Group MMSI number via the numeric
key pad starting with a "0".
Group – Traffic frequency menu.