Icom IC M802 Notes On Operation page 17

INTER 4-1, 6-1, 8-1, 12-1 16-1 frequencies. Leaving the other frequencies programmed, e.g INTER 4-2,
6-2, etc.
1. In DSC Watch press [SET/MODE] to display the DSC MENU.
2. Rotate the [CH] knob to select Set up and press [ENT].
3. Rotate the [CH] knob to select Call frequency and press [ENT]
4. Rotate the [CH] knob to select (INTER 4-1, 6-1, 8-1, 12-1 16-1 duplex frequencies one at
a time for deletion) and press [ENT].
5. Press and hold the [CE] until two beeps are heard and that memory location will be
clear.
6. Repeat this procedure for each of the INTER frequencies listed above.