Zenoah G260PU-EI Owner's Service Manual page 5

Fig.6
Gap: 5mm or
more
surface D
Fig.7
Bolt (4mm)
5. Propeller, Rotor & Screw Propeller
The recommended prop sizes are as shown in the table bellow.
Diameter x Pitch ( in.)
18 x 7 ~ 12, 16 x 10 ~ 14
Be sure to use a propeller which makes the engine speed approximately
7,500~8,500 rpm while the airplane is flying.
CAUTION
When mounting the spinner, set a pin on the hub with more than 3mm of
diameter, thus preventing slipping.
surface D
Sensor wire
Unit
surface D
Ground wire
Sensor
Sparkplug wire
surface D
Switch
Capacity: 3A (or higher)
(not supplied)
Battery wire
Use of anything
other than an 4.8V
battery is prohibited.
surface D
Sponge & cloth
For charging
Battery 4.8V
1500~2700mA
(not supplied)
5