Eyelet; Continuous Decorative Pattern; Sewing Lightweight Fabrics - Singer SE300 Instruction Manual

S
ewIng

EYELET

This stitch pattern is used for making belt holes and other
similar applications.
31 Eyelet
Satin Foot (B)
You can choose 3 sizes of eyelets by changing the stitch
length.
1. Place the fabric under the presser foot and lower the
presser foot. Start the machine.
Machine will sew the eyelet and stop automatically.
2. Press the Thread Cutter button and raise the presser foot.
3. Make a hole in the center of the eyelet.
NOTE:
Eyelet punch is not provided with this machine.

CONTINUOUS DECORATIVE PATTERN

Use the Satin Foot for continuous decorative stitch patterns.
This foot has a groove on the underside to allow satin stitches (or
other closely spaced stitches) to feed freely under the foot.
No. 39-249
Satin Foot (B)
To customize the continuous decorative stitch pattern, you may
adjust the length and width of pattern. Experiment with fabric
scraps until you achieve the desired length and width.
S l
ewIng IghtweIght
When sewing lightweight fabrics, it is suggested that you use
stabilizer on the backside of the fabric. This can help prevent
stitches from puckering the fabric.
35
f
abrIcS