Singer 750 Instructions Manual
Deluxe zig-zag sewing machine
Hide thumbs
Also See for 750:
- Instructions manual (13 pages) ,
- Parts manual (29 pages) ,
- Tension repair manual (8 pages)
Need help?
Do you have a question about the 750 and is the answer not in the manual?
Questions and answers
how do I thread the bobbin the thread all bunches up when I try to sew
To prevent thread bunching on a Singer 750 sewing machine, follow these steps to correctly thread the bobbin:
1. Raise the needle and presser foot using the handwheel so the threading path is open.
2. Place the spool of thread on the spool pin and pull the thread through the thread guide.
3. Pull the thread through the tension mechanism to ensure proper tension.
4. Guide the thread through the loops and brackets in the correct sequence, including the silver bracket and loop-de-loop guides.
5. Insert the thread into the bobbin and place the bobbin on the bobbin winder.
6. Hold the thread tail and start winding the bobbin evenly.
7. Insert the wound bobbin into the bobbin case and ensure it is seated properly.
8. Rethread the upper thread completely, ensuring it is securely in the tension mechanism.
Thread bunching is often caused by incorrect upper threading, not the bobbin, so always double-check the upper thread path.
This answer is automatically generated
how to wind the bobbin
To wind the bobbin for the Singer Touch & Sew 750:
1. Slip the lever over.
2. Raise the presser foot.
3. Wrap the thread around the screw.
4. Use a straight stitch to pick up the thread.
5. After a turn or two, the machine will cut the thread tail.
6. The thread wraps around the bobbin.
7. When done, push the plate forward.
8. Pop the shifter back in to disengage the winding.
Now the machine is ready to sew.
This answer is automatically generated