Advertisement
Android
USB tethering must be activated to connect to the ScanPlan. The app will automatically redirect you to the right settings
page (Settings < Connections < Mobile Hotspot and Tethering). Start the app and choose USB connection.
Activate USB Tethering. Note: In Android systems this step must be done each time the phone is reconnected.
iOS
The phone will ask for confirmation that you want to trust the device. Confirm, and the connection will complete.
The first time you connect you must activate connection sharing via USB. Go to Settings > Personal Hotspot and
activate the personal hotspot. This will allow a connection between ScanPlan and the iOS Device. Note: Choose the
WLAN Password carefully as your phone can now also operate as a mobile access point and share its connection
Connecting Your Phone
1. Switch on the ScanPlan by pressing the power button. The LED on the button will blink while booting, and will stop
blinking when the ScanPlan is ready to scan.
2. Switch on your smartphone. Flip open the phone tray and press gently until it clicks into place.
3. Place your smartphone in the tray. Magnets in the tray will attach it firmly.
https://knowledge.faro.com/Hardware/2D_Scanners/ScanPlan/Connecting_Your_Phone_to_the_ScanPlan
Updated: Fri, 20 Aug 2021 05:36:17 GMT
3
Advertisement
