Advertisement
2. Attach the metallic sticker to the back of your phone at the place were the magnets will contact it.
Note: If you have a very thick protective case on your phone, the charging port may not align with the ScanPlan
port. Remove the phone case or replace with a thinner case.
3. Three magnetic USB adapters are provided with the ScanPlan.
Find the adapter that fits your phone's charging port and carefully insert it into the port.
https://knowledge.faro.com/Hardware/2D_Scanners/ScanPlan/Connecting_Your_Phone_to_the_ScanPlan
Updated: Fri, 20 Aug 2021 05:36:17 GMT
2
Advertisement
