Windshield Washer - GMC 2007 Yukon XL Owner's Manual

Windshield Washer

CAUTION:
{
In freezing weather, do not use your
washer until the windshield is warmed.
Otherwise the washer fluid can form ice
on the windshield, blocking your vision.
(Washer Fluid): There is a paddle marked
L
with the windshield washer symbol at the top of the
multifunction lever. To spray washer fluid on the
windshield, push the paddle. The wipers will clear
the window and then either stop or return to your
preset speed.
Heated Windshield Washer
If your vehicle has the heated windshield washer
fluid system it may be used to help clear ice,
snow, tree sap, or bugs from your windshield.
194
Push the heated washer fluid button to activate
the heated windshield washer fluid system.
The indicator light will be on. This activation will
initiate four heated wash/wipe cycles. The first
heated wash/wipe cycle may take up to 40 seconds
to occur, depending on outside temperature.
After the first wash/wipe cycle, it may take up to
20 seconds for each of the remaining cycles to
begin. Press the button again to turn off the
heated windshield washer fluid system or it will
automatically turn off after four wipe cycles have
been completed.
When the heated windshield washer fluid system
is activated under certain outside temperature
conditions, steam may flow out of the washer
nozzles for a short period of time before washer
fluid is sprayed. This is a normal condition.
The button is located in
the switchbank under
the climate controls.