Epcom XMR Series User Manual page 16

13 Reset
If the system crash and the operation is no respond, long press power button for about 10
seconds, the camera will be forced to reset
Remark: Reset operation will not cause data loss or damage, and it will not change the system
settings.
1. Replace battery
1 Press the battery cover lock down, and do not loose it
2 Push the battery cover parallel to the direction of the arrow and remove it.
2. Charging the Battery
Remark: When you recharge the body camera, please make sure it is OFF. Also, even you
don't use the camera for a long time; please recharge it every 3 months.
1.Charge the camera
Connect this camera and adapter via USB cable, and connect adapter to power supply to
charge the battery. In charging status, the status indicator will turn red. Once the battery is fully
charged, the status indicator will turn green.
14