Handling The Equipment; Care And Maintenance - Kettler ALPHA RUN 200 Safety Instructions And Information On Use

⚠
W arning! Any interference with parts of the product that are not described within the manual may cause damage, or en-
danger the person using this machine. Extensive repairs must only be carried out by KETTLER service staff or qualified
personnel trained by KETTLER.
EN
• To ensure that the safety level is kept to the highest possible standard, determined by its construction, this product
should be serviced regulary (once a year) by specialist retailers.
• In case of enquiry, please contact your KETTLER dealer.

Handling the equipment

• The training device corresponds with DIN EN ISO 20957-1:2014/DIN EN ISO 20957-9:2017, class SA (
therefore suitable for therapeutic use.
• The training device corresponds with DIN EN ISO 20957-1:2014/DIN EN ISO 20957-9:2017, class HB (
therefore unsuitable for therapeutic use.
• Before using the equipment for exercise, check carefully to ensure that it has been correctly assembled.
• It is not recommended to use or store the apparatus in a damp room as this may cause it to rust. Please ensure that no
part of the machine comes in contact with liquids (drinks, perspiration etc.). This may cause corrosion.
• The machine is designed for use by adults and children should not be allowed to play with it. Children at play behave
unpredictably and dangerous situations may occur for which the manufacturer cannot be held liable. If, in spite of this,
children are allowed to use the equipment, ensure that they are instructed in its proper use and supervised accordingly.
• Always wear suitable shoes when using.
• Before beginning your first training session, familiarize yourself thoroughly with all the functions and settings of the unit.
• If the equipment is in regular use, check all its components thoroughly at appropriate intervals. Pay particular attention
to the tightness of bolts.
• In case of a regular use of the running belt, the cold running belt has to be serviced with silicone oil.
• Warning: If there are protruding adjustment devices these may interfere with the user's movements.
• Observe the movement of the edge of the belt when it is in use. If it tends to run towards the side, readjust it accordingly.
• Depending on the degree of use and load to which the unit is subjected, the belt may tend to stretch or slip. Tighten the
belt as described. Adjust the tightness of the belt as described in section „handling".
• Running Tip: Running straight on the treadmill is made easier by focussing on a fixed object in front of you in the room.
Run as if you wanted to approach the object.
• Importantly: Please keep the safety key in a safe place and ensure that it is kept out of reach of children!
• This equipment can be used by persons of at least 14 years of age and by persons with reduced physical, sensory or
mental abilities or lack of experience and knowledge if they are supervised or have been instructed regarding the safe
use of the equipment and understand the resulting hazards.
• This manual can be downloaded from www.kettler.com.

Care and Maintenance

• ATTENTION: The lubrication and care of the belt is the most important maintenance mea-sure! An insufficient lubricati-
on and the associated clear increase of friction leads to more wear and tear and to damage of the treadmill belt, running
board, motor and circuit board! Damages which occur from defective or neglected care and maintenance of the belt are
not covered by the guarantee!
• In case of a regular use of the running belt, the cold running belt has to be serviced every 10 operating hours or every 2
month with silicone
• Prior to the 1st commissioning of the device or after a longer period of not using the devi-ce, this service has to be per-
formed as well.
• Insert the small spray pipe between the belt and the running board and give 3 short (about 1 second) spray bursts of
silicone lubricant between the belt and the running board. The spray pipe should be moved to one side to ensure that the
entire lower side of the belt is moistened. Then further turn the belt over by hand so that the entire surface between the
belt and the running board is lubricated.
• Wipe away any superfluous lubricant.
• The electrical elements and components do not require special maintenance. No alterations or repairs (except mantai-
nance checks) should be made to these parts unless by a qualified electrician.
• Example order: Art. no. xxxxx-yyy / spare-part no. 00000000 / 2 pieces / S/N .................... Please keep original packaging
of this article, so that it may be used for transport at a later date, if necessary.
• Goods may only be returned after prior arrangement and in (internal) packaging, which is safe for transportation, in the
original box if possible. It is important to provide a detailed defect description / damage report!
• When ordering spare parts, always state the full article number, spare-partnumber, the quantity required and the S/N of
the product (see handling).
• Important: spare part prices do not include fastening material; if fastening material (bolts, nuts, washers etc.) is requi-
red, this should be clearly stated on the order by adding the words „with fastening material".
• Parts of the device which are subject to wear are designated in the Replacement Parts List with a * (see individual as-
sembly instructions).
Waste Disposal
KETTLER products are recyclable. At the end of its useful life please dispose of this article correctly and safely (local refuse
7 english
oil.
Type label). It is
Type label). It is