GMC 1995 Safari Owner's Manual page 84

When the high beams
are on, this blue
indicator light on the
instrument panel also
will be on.
Windshield Wipers
E
You control the
windshield wipers by
turning the band with
fl
the wiper symbol on
it.
For a single wiping cycle, turn the band to MIST. Hold it there until the
wipers start, then let go. The wipers will stop after one wipe. If you want
more wipes, hold the band on MIST longer.
You can set the wiper speed for a long or short delay between wipes. This
can be very useful in light rain or snow. T u r n the band to choose the delay
time. The closer to LO, the shorter the delay.
For steady wiping at low speed, turn the band away from you to the LO
position. For high speed wiping, turn the band further, to HI. To stop the
wipers, move the band to the off symbol.
Remember that worn or damaged wiper blades may prevent you from
seeing well enough to drive safely. To avoid damage, be sure to clear ice
and snow from the wiper blades before using them. If they're frozen to the
windshield, carefully loosen or thaw them. If your blades do become worn
or damaged, get new blades or blade inserts.
32