GMC 1995 Safari Owner's Manual page 52

Checking Your Restraint Systems
Now and then, make sure all your belts, buckles, latch plates, retractors,
anchorages and reminder systems are working properly. Look for any other
loose or damaged restraint system parts. If you see anything that might keep
a restraint system from doing its job, have it repaired.
Torn or frayed belts may not protect you in a crash. They can rip apart under
impact forces. If a belt is torn or frayed, get a new one right away.
Replacing Seat and Restraint System Parts
After a Crash
If you've had a crash, do you need new belts?
After a very minor collision, nothing may be necessary. But if the belts were
stretched, as they would be if worn during a more severe crash, then you
need new belts.
If belts are cut or damaged, replace them. Collision damage also may mean
you will need to have safety belt or seat parts repaired or replaced. New
parts and repairs may be necessary even if the belt wasn't being used at the
time of the collision.
Before replacing any safety belt, see your dealer for the correct part number.
You'll need the model year and model number for your vehicle. The model
year is on your title and registration. And you can find the model number on
the CertificationiTire label of your vehicle. See "CertificatiordTire Label" in
the Index.
The model number on the replacement belt must be listed on the safety belt
you want to replace. Pull the shoulder belt all the way out to see this label.
1-42