GMC 1995 Safari Owner's Manual page 130

REV
-
To rapidly reverse the tape, press
4
or
b
in the opposite direction
that the amber arrow points and the tape will rapidly reverse until you press
the STOP-EJECT button lightly.
APS - Press the APS button to the recessed position.
Press
4
or
b
in the direction that the amber arrow points to go to the
beginning of the next selection.
Press
4
or
b
in the opposite direction that the amber arrow points and the
tape will reverse to the beginning
of
the current selection.
PROGRAM - To go from one side of the tape to
the other, press the
VOL-PROG-RCL knob.
STOP- EJECT
-
To remove the tape or stop the tape and switch to radio,
press the STOP-EJECT button.
If "Cln" (Clean) appears on the display when you insert your cassette tape,
your cassette player needs to be cleaned. It will still play cassette tapes but it
should be cleaned to prevent damage to your cassette tapes and the cassette
tape player. See "Care of Your Cassette Tape Player" later in this section.
After
you
have cleaned the cassette tape player, press and hold EJECT for 5
seconds to reset the the "Cln" indicator. The radio will display
"-
-
-"
to
show the clean feature has been reset.
How to Operate Your ET?@ AM-FM Stereo Audio
Compact Disc (CD) System
This part tells you how your ETR' AM-FM stereo system works:
Upper Knob VOL)
-
The upper knob has one function:
Turn it to control the volume. Volume will be displayed briefly unless
Left/Right speaker control, RearPront speaker control, BASS or TREB
are adjusted.
LeftRight Speaker Control
-
The control ring behind the upper knob
allows you to balance the sound between the left and right speakers.
Balance will be displayed briefly when using this control.
Lower Knob (TUNE-BAND)
-
The lower knob has two functions:
0
Turn it to tune in radio stations.
Press it to change between the AM and
FM
bands.
Rearmront Speaker Control
-
The control ring behind the lower knob
fades the sound between your rear and front speakers. Fade levels will be
briefly displayed.
SEEK
-
Press the SEEK button to cause the receiver to seek the next
higher station.
3 -14