GMC 1995 Safari Owner's Manual page 128

If a tape is inserted with side "1" (or
"A")
up, then the right arrow means
that that side is being played. Likewise, a left arrow would indicate that side
"2" (or "B") had been selected. The player will automatically switch to the
other side of the tape when the first side ends.
If "Cln" (Clean) appears on the display when you insert your cassette tape,
your cassette player needs to be cleaned. It will still play cassette tapes but it
should be cleaned to prevent damage to your cassette tapes and the cassette
tape player. See "Care of Your Cassette Tape Player" later in this section.
After
you
have cleaned the cassette tape player, press and hold
STOP-EJECT for
5
seconds to reset the the "Cln" indicator. The radio will
display
"-
-
-"
to show the clean feature has been reset.
How to Operate Your E T P AM-FM Stereo Audio
Cassette System with Equalizer
This part tells you how your ETR@AM-FM stereo audio cassette system
with equalizer works:
Upper Knob (VOL-PROG-RCL) - The upper knob has these five
functions:
Turn it to switch the system on and off.
Turn it to control the volume.
0
Press it to display the time when the ignition is off.
0
Press it to change between the clock and the radio station frequency
displayed when the radio is on.
Press it to change sides of a tape when a cassette is playing.
BAL (Balance)
-
The control ring behind the upper knob adjusts the
lefthight speaker balance.
Lower Knob (TUNE-AM-FM)
-
The lower knob has two functions:
0
Turn it to tune in radio stations.
Press it to change between the AM and
FM
bands.
FADE - The control ring behind the lower knob adjusts the fronurear
speaker balance.
SEEK
-
Press the SEEK button to cause the receiver to SEEK the next
higher station and stop.
SCAN
-
Press the SCAN button to hear each station for a few seconds.
Push it again when you reach the station you want to listen to and the radio
will stop scanning. "SCAN" appears in the display.
3 4 2