GMC 1993 Safari Owner's Manual page 147

Cassette Tape Player
Your tape player is built to work best with tapes that are 30 to 45 minutes
long on each side. Tapes longer than that are so thin they might not work
well in this player.
To play a cassette tape:
Have the radio on.
Insert the tape squarely through the tape door.
The longer side with the tape visible goes in first. If you hear nothing or hear
just garbled sound, it may not be in squarely.
Push EJECT to remove the tape and start over.
Once the tape is playing, use the upper and lower knobs for volume
and balance, just as you
do for the radio. The arrows show which side
of the tape is playing.
To go forward to another part of the tape, push FWD.
To go backward, push REV. To stop the tape push the other button
To go from one side
of the tape to the other, push
in the upper knob
The SEARCH button lets you play a selection again,
or skip ahead to the
next selection.
lightly.
on
your radio. To remove or stop the tape, push EJECT.
To play the selection again:
Push SEARCH button to the right. (The ON light will come on.)
Push REV to go back to the beginning of the selection that
is playing.
To play the next selection:
Push SEARCH button to the right. (The ON light will come on.)
Push FWD. The tape will go
to the next selection.
Press EJECT to remove the cassette and start the radio.
3-2 1