Table of Contents
Advertisement
1
Voltmeter
Standard Cluster
Digital Cluster
J
PO652
When your engine is not running,
but the ignition is on (in the
Run position),
the gage shows your battery's state
of charge in DC volts. When the ignition
is running, the gage shows the condition
of the charging system. Readings
between the low and high warning zones indicate the normal operating range.
Readings in either warning zone indicate a possible' problem
in the electrical
system.
On the digital cluster, a
box around the voltmeter symbol will begin to flash
when the charging system needs service.
You can only drive for a short time with
the readings in either warning zone.
If
you must drive, turn
off all unnecessary accessories.
Indicator Lights
Indicator lights
go
on when you use your turn signals, change from low beam
'headlights to high beams, or when you use your hazard flashers. The next
few pages will also tell you about the indicator lights on your vehicle and
help you locate them.
2-64
Advertisement
Chapters
Table of Contents
