Table of Contents
Advertisement
In order to bleed the cooling system properly
after initial fill with coolant, it might need up
to five cycles of:
heating up the system (thermostat open)
making sure coolant is at least up to the
cold fill mark of overflow bottle
letting the coolant cool down (engine
coolant temperature gauge below the N of
NORMAL)
topping off the coolant overflow bottle to
the cold fill mark
If coolant loss continues after 7,500 miles
(12,000 km), consult your Ford Dealer.
Windshield Washer Fluid and
Wipers
Washer Fluid
Check the level of the windshield washer fluid
every time you stop for fuel. The reservoir for
the windshield washer fluid is located in the
engine compartment.
Do not put windshield washer fluid in the
container for the engine coolant.
Windshield washer reservoir
RWARNING
291
Hide quick links:
Advertisement
Table of Contents
