Chevrolet 2011 Volt Owner's Manual page 403

6. Reinstall the lamp assembly (C)
into the fascia by inserting the
left side first.
7. Push the spring clip side into
place.
Back-Up Lamps
High/Low Beam
HIR2 (9012)
Headlamps
License Plate
Lamps
For replacement bulbs not listed
here, contact your dealer.
Exposure to high voltage
can cause shock, burns, and
even death. The high voltage
3157K
components in the vehicle can
only be serviced by technicians
with special training.
168LL
High voltage components are
(W5W)
identified by labels. Do not
remove, open, take apart,
or modify these components.
High voltage cable or wiring has
orange covering. Do not probe,
tamper with, cut, or modify high
voltage cable or wiring.
The vehicle has fuses and circuit
breakers to protect against an
electrical system overload.
When the current electrical load is
too heavy, the circuit breaker opens
and closes, protecting the circuit
until the current load returns to
normal or the problem is fixed.
This greatly reduces the chance
of circuit overload and fire caused
by electrical problems.
Fuses and circuit breakers protect
the following in the vehicle:
Headlamp Wiring
Windshield Wiper Motor
Power Windows and other
Power Accessories
Replace a bad fuse with a new one
of the identical size and rating.