Page 1 ......1-1 Instrument Panel ....1-2 Initial Drive Information .
Page 2: Table Of Contents
Jump Starting ....10-88 Towing ..... . 10-93 Appearance Care .
Page 3 The names, logos, emblems, slogans, vehicle model names, and vehicle body designs appearing in this manual including, but not limited to, GM, the GM logo, CHEVROLET, the CHEVROLET Emblem, TAHOE, SUBURBAN, and Z71 are trademarks and/or service marks of General Motors LLC, its subsidiaries, affiliates, or licensors.
Page 4 To quickly locate information about the vehicle, use the Index in the back of the manual. It is an alphabetical list of what is in the manual and the page number where it can be found. Warning messages found on vehicle labels and in this manual describe hazards and what to do to avoid or reduce them.
Page 5 Here are some additional symbols that may be found on the vehicle and what they mean. For more information on the symbol, refer to the Index. Adjustable Pedals Airbag Readiness Light Air Conditioning Antilock Brake System (ABS) Audio Steering Wheel Controls ®...
Page 7: Head Restraints
Instrument Panel Overview ..1-2 Initial Drive Information ..1-4 Remote Keyless Entry (RKE) System ..... . 1-4 Remote Vehicle Start .
Page 9: Instrument Panel
A. Air Vents on page 8 13. B. Turn and Lane Change Lever. See Turn and Lane-Change Signals on page 6 5. Windshield Wiper/Washer on page 5 5. Rear Window Wiper/Washer on page 5 6. C. Instrument Cluster on page 5 12. D.
Page 10 This section provides a brief overview about some of the important features that may or may not be on your specific vehicle. For more detailed information, refer to each of the features which can be found later in this owner manual. The RKE transmitter is used to remotely lock and unlock the doors from up to 60 m (195 ft) away from...
Page 11 When the vehicle starts, the parking lamps will turn on and remain on as long as the engine is running. The doors will be locked and the climate control system may come on. The engine will continue to run for 10 minutes.
Page 12 Press on the overhead console inside the vehicle. Press the touchpad switch (B) on the outside liftgate handle to open. Press the button next to the liftgate latch to close. To disable the power liftgate function, press OFF on the overhead console.
Page 13 To adjust a power seat, if equipped: Move the seat forward or rearward by sliding the control forward or rearward. If available, raise or lower the front or rear part of the seat cushion by moving the front or rear of the control up or down. If available, raise or lower the entire seat by moving the entire control up or down.
Page 14 See Lumbar Adjustment on page 3 6 for more information. To recline a manual seatback: 1. Lift the lever. 2. Move the seatback to the desired position, and then release the lever to lock the seatback in place. 3. Push and pull on the seatback to make sure it is locked.
Page 15 On vehicles with the memory feature, the controls on the driver door are used to program and recall memory settings for the driver seat, outside mirrors, and the adjustable throttle and brake pedals, if equipped. To save into memory: 1. Adjust the driver seat and seatback recliner, both outside mirrors, and the throttle and brake pedals, if equipped.
Page 16: Front Seats
On vehicles with a 60/40 split bench or buckets seats, the seatbacks can be folded for additional cargo space, or the seats can be folded and tumbled for easy entry/exit to the third row seats, if equipped. On vehicles with bucket seats, the seatbacks also recline.
Page 17: Safety Belts
If available, the buttons are on the front doors. Press to cool the seat. Press to heat the seatback only. Press to heat the seat and seatback. Press the button once for the highest setting. With each press of the button, the seat will change to the next lower setting, and then to the off setting.
Page 18 The passenger sensing system, if equipped, will turn off the right front passenger frontal airbag under certain conditions. The driver airbag, seat mounted side impact airbags (if equipped), and roof rail airbags are not affected by this. If the vehicle has one of the indicators pictured in the following illustrations, then the vehicle has a passenger sensing system for the...
Page 19 Vehicles with outside power mirrors and foldaway mirrors have controls located on the driver door. 1. Press (A) or (B) to select the driver or passenger side mirror. 2. Press the arrows on the control pad to move the mirror up, down, right, or left.
Page 20 The tilt lever is located on the lower left side of the steering column. To adjust the steering wheel: 1. Hold the steering wheel and pull the lever. 2. Move the steering wheel up or down. 3. Release the lever to lock the wheel in place.
Page 21 The dome lamp override button is located next to the exterior lamps control. Press the button in and the dome lamps remain off when a door is opened. Press the button again to return it to the extended position so that the dome lamps come on when a door is opened.
Page 22 Automatically turns on the headlamps, parking lamps, taillamps, instrument panel lights, and license plate lamps. Turns on the parking lamps, taillamps, instrument panel lights, and license plate lamps. Turns on the headlamps, parking lamps, taillamps, instrument panel lights, and license plate lamps.
Page 23 The heating, cooling, and ventilation in the vehicle can be controlled with these systems. If this vehicle is a hybrid, see the hybrid supplement for more information. A. Fan Control B. REAR (Rear Climate Control) C. Air Recirculation D. Air Delivery Mode Control E.
Page 24 A. Fan Control B. AUTO (Automatic Operation) C. Defrost D. Air Recirculation E. REAR (Rear Climate Control) Air Delivery Mode Control G. Driver Temperature Control H. Display Power Button Rear Window Defogger K. Air Conditioning PASS M. Passenger Temperature Control See Dual Automatic Climate Control System on page 8 4.
Page 25 Press the plus/minus buttons, located on the steering column shift lever, to select the desired range of gears for current driving conditions. See Manual Mode on page 9 42. While using Range Selection Mode, cruise control and the Tow/Haul mode can be used. Grade Braking is not available when Range Selection Mode is active.
Page 26 Vehicles with a two speed transfer case have a N (Neutral) position. Shift the transfer case to N (Neutral) only when towing the vehicle. See Recreational Vehicle Towing on page 10 93 or Towing the Vehicle on page 10 93. See Four-Wheel Drive (Two Speed Automatic Transfer Case) on page 9 45 or Four-Wheel Drive...
Page 27 Press to switch the display between the radio station frequency and the time. While the ignition is off, press this button to display the time. Press to display additional text information related to the current FM-RDS or XM station; or CD, MP3, or WMA song.
Page 28 XM is a satellite radio service based in the 48 contiguous United States and 10 Canadian provinces. XM satellite radio has a wide variety of programming and commercial-free music, coast to coast, and in digital-quality sound. A fee is required to receive the XM service.
Page 29 If available, some audio controls can be adjusted at the steering wheel. Press to select preset or favorite radio stations, select tracks on a CD/DVD, or to navigate an iPod or USB device. Press to silence the vehicle speakers only. Press again to turn the sound on.
Page 30 Press to set the speed and activate cruise control or make the vehicle decelerate. Press to disengage cruise control without erasing the set speed from memory. See Cruise Control on page 9 57. If the vehicle has a navigation system, there is a separate navigation system manual that includes information on the radio, audio players, and navigation...
Page 31 If available, Ultrasonic Rear Parking Assist (URPA) uses sensors on the rear bumper to detect objects while parking the vehicle. URPA comes on automatically when the shift lever is moved into R (Reverse) and operates at speeds less than 8 km/h (5 mph).
Page 32 There are two sunroof switches on the overhead console above the rearview mirror. To open or close the sunroof, press the open or close switch (A) to the first detent position. To express open or close the sunroof, press the open or close switch (A) to the second detent position and release.
Page 33: Maintenance
To turn off both traction control and StabiliTrak, press and hold until illuminates and the appropriate DIC message displays. See Ride Control System Messages on page 5 43. Press and release again to turn on both systems. For more information, see ®...
Page 34 Follow recommended scheduled maintenance. U.S.: TTY Users (U.S.): Canada: Mexico: As the owner of a new Chevrolet, you are automatically enrolled in the Roadside Assistance program. See Roadside Assistance Program (U.S. and Canada) on page 13 7 or Roadside Assistance Program (Mexico) on page 13 10 for more information.
Page 35 If you have an active OnStar subscription, press the button and the current GPS location will be sent to an OnStar advisor who will assess your problem, contact Roadside Assistance, and relay your exact location to get the help you need. The Online Owner Center is a complimentary service that includes online service reminders, vehicle...
Page 36 www.onstar.ca (Canada), contact OnStar at 1-888-4-ONSTAR (1 888 466 7827) or TTY 1 877 248 2080, or push speak with an OnStar Advisor 24 hours a day, seven days a week. For a full description of OnStar services and system limitations, see the OnStar Owner's Guide in the glove box.
Page 37 This vehicle may have a Talk/Mute button that can be used to interact with OnStar Hands-Free Calling. See Steering Wheel Controls on page 5 3 for more information. On some vehicles, the mute button can be used to dial numbers into voice mail systems, or to dial phone extensions.
Page 39: Keys And Locks
Keys, Doors and Windows Keys and Locks Keys ......2-2 Remote Keyless Entry (RKE) System ..... . 2-2 Remote Keyless Entry (RKE) System Operation .
Page 40: Keys And Locks
Keys, Doors and Windows Keys and Locks Keys WARNING Leaving children in a vehicle with the ignition key is dangerous for many reasons. Children or others could be badly injured or even killed. They could operate the power windows or other controls or even make the vehicle move.
Page 41: Remote Keyless Entry (Rke) System Operation
Check the transmitter's battery. See Battery Replacement later in this section. If the transmitter is still not working correctly, see your dealer or a qualified technician for service. Remote Keyless Entry (RKE) System Operation The Remote Keyless Entry (RKE) transmitter functions work up to 60 m (195 ft) away from the vehicle.
Page 42 Keys, Doors and Windows (Unlock): Press once to unlock only the driver door. If is pressed again within three seconds, all remaining doors unlock. The interior lamps may come on and stay on for 20 seconds or until the ignition is turned on.
Page 43: Remote Vehicle Start
To replace the battery: 1. Separate the transmitter with a flat, thin object, such as a flat head screwdriver. Carefully insert the tool into the notch located along the parting line of the transmitter. Do not insert the tool too far. Stop as soon as resistance is felt.
Page 44 Keys, Doors and Windows If the vehicle has the remote start feature, the RKE transmitter functions will have an increased range of operation. However, the range may be less while the vehicle is running. There are other conditions which can affect the performance of the transmitter.
Page 45: Door Locks
The vehicle cannot be remote started if the key is in the ignition, the hood is not closed, or if there is an emission control system malfunction and the check engine light is on. Also, the engine will turn off during a remote vehicle start if the coolant temperature gets too high or if the oil pressure gets low.
Page 46: Doors
Keys, Doors and Windows Power Door Locks With power door locks, the switches on the front doors can be used to lock and unlock the vehicle. (Unlock): Press to unlock the doors. (Lock): Press to lock the doors. Delayed Locking When locking the doors with the power lock switch and a door or the liftgate is open, the doors will lock...
Page 47: Liftgate (Power)
Open the rear doors to access the security locks on the inside edge of each door. To set the locks, insert a key into the slot and turn it to the horizontal position. The door can only be opened from the outside with the door unlocked.
Page 48 2-10 Keys, Doors and Windows The taillamps will flash and a chime will sound when the power liftgate is moving. WARNING You or others could be injured if caught in the path of the power liftgate. Make sure there is no one in the way of the liftgate as it is opening and closing.
Page 49 Obstacle Detection Features If the liftgate encounters an obstacle during a power open or close cycle, a warning chime will sound and the liftgate will automatically reverse direction to the full closed or open position. After removing the obstruction, the power liftgate operation can be used again.
Page 50: Liftgate (Manual)
2-12 Keys, Doors and Windows Liftgate (Manual) WARNING It can be dangerous to drive with the liftglass or liftgate open because carbon monoxide (CO) gas can come into your vehicle. You cannot see or smell CO. It can cause unconsciousness and even death.
Page 51: Vehicle Security
The liftgate or liftglass cannot be opened if the rear wipers are in motion. Attempting to open the liftgate or liftglass while the rear wipers are in motion will cause the release of the liftglass or liftgate to delay until the wipers are moved off the liftglass.
Page 52 2-14 Keys, Doors and Windows To arm the theft-deterrent system: 1. Open the door. 2. Lock the door with the Remote Keyless Entry (RKE) transmitter or the power door lock switch. The security light will come on to inform the driver the system is arming.
Page 53: Immobilizer Operation
Testing the Alarm To test the alarm: 1. From inside the vehicle, lower the driver window and open the driver door. 2. Activate the system by locking the doors with the power door lock switch while the door is open, or with the RKE transmitter.
Page 54 2-16 Keys, Doors and Windows If the engine still does not start, and the key appears to be undamaged, try another ignition key. At this time, you may also want to check the fuse. See Fuses and Circuit Breakers on page 10 41. If the engine still does not start with the other key, the vehicle needs service.
Page 55: Exterior Mirrors
Exterior Mirrors Convex Mirrors WARNING A convex mirror can make things, like other vehicles, look farther away than they really are. If you cut too sharply into the right lane, you could hit a vehicle on the right. Check the inside mirror or glance over your shoulder before changing lanes.
Page 56: Folding Mirrors
2-18 Keys, Doors and Windows To adjust each mirror: 1. Press (A) or (B) to select the driver or passenger side mirror. 2. Press the arrows on the control pad to move the mirror up, down, right, or left. 3. Adjust each outside mirror so that a little of the vehicle and the area behind it can be seen.
Page 57: Windows
Turn Signal Indicator The vehicle may have a turn signal indicator on the mirror. An arrow on the mirror flashes in the direction of the turn or lane change. Ground Illumination Lamps The mirrors may also include ground illumination lamps in the base of the mirror.
Page 58: Interior Mirrors
2-20 Keys, Doors and Windows Interior Mirrors Manual Rearview Mirror Hold the mirror in the center to move it for a clearer view of behind your vehicle. Adjust the mirror to avoid glare from the headlamps behind you. Push the tab at the bottom of the mirror forward for daytime use and pull it for nighttime use.
Page 59: Roof
The vehicle aerodynamics are designed to improve fuel economy performance. This may result in a pulsing sound when either rear window is down and the front windows are up. To reduce the sound, open either a front window or the sunroof (if equipped). Keys, Doors and Windows Power Windows WARNING...
Page 60: Sun Visors
2-22 Keys, Doors and Windows Express Down Windows Windows that have the express down feature allow the windows to be lowered without holding the switch. Press the window switch fully and release it to activate the express down feature. The express mode can be canceled at any time by briefly pressing, or pulling the switch.
Page 61 The sunroof only operates when the ignition is in ON/RUN or ACC/ ACCESSORY, or in Retained Accessory Power (RAP). See Retained Accessory Power (RAP) on page 9 34 for more information. To open or close the sunroof, press the open or close switch (A) to the first detent position.
Page 62 2-24 Keys, Doors and Windows NOTES...
Page 143: Airbag System
Instruments and Controls Controls Steering Wheel Adjustment . . . 5-2 Steering Wheel Controls ..5-3 Horn ......5-5 Windshield Wiper/Washer .
Page 144: Instruments And Controls
Instruments and Controls Vehicle Personalization Vehicle Personalization (With DIC Buttons) ....5-48 Universal Remote System Universal Remote System . . . 5-56 Universal Remote System Programming ....5-56 Universal Remote System Operation .
Page 145 Steering Wheel Controls If equipped, some audio controls can be adjusted at the steering wheel. (Next/Previous): Press to select preset or favorite radio stations, select tracks on a CD/ DVD, or navigate an iPod or USB device. Radio To select preset or favorite radio stations: Press and release go to the next or previous radio...
Page 146 Instruments and Controls Navigating an iPod or USB Device on the Main Audio Screen (Vehicles with a Navigation System) 1. Press and release to select the next or previous track within the selected category. 2. Press and hold move quickly through the tracks. 3.
Page 147: Horn
For vehicles with a navigation system: 1. Press and hold until a beep is heard, to place the radio into SCAN mode. A station will play for five seconds before moving to the next station. 2. To stop the SCAN function, press again.
Page 148: Rear Window Wiper
Instruments and Controls Rear Window Wiper/ Washer WARNING In freezing weather, do not use the washer until the windshield is warmed. Otherwise the washer fluid can form ice on the windshield, blocking your vision. The rear wiper control is located on the turn and lane change lever.
Page 149 To adjust for compass variance, use the following procedure: Compass Variance (Zone) Procedure 1. Do not set the compass zone when the vehicle is moving. Only set it when the vehicle is in P (Park). Press the vehicle information button until PRESS CHANGE COMPASS ZONE displays.
Page 150: Clock
Instruments and Controls If CAL should ever appear in the DIC display, the compass should be calibrated. If the DIC display does not show a heading, for example, N for North, or the heading does not change after making turns, there may be a strong magnetic field interfering with the compass.
Page 151: Power Outlets
4. To increase the time or date, do one of the following: Press the softkey below the selected tab. Press the SEEK button. Press the FWD button. Turn the knob clockwise. 5. To decrease the time or date, do one of the following: Press the SEEK button.
Page 152 5-10 Instruments and Controls Certain accessory plugs may not be compatible with the accessory power outlet and could overload adapter or vehicle fuses. If a problem is experienced, see your dealer. When adding electrical equipment, be sure to follow the proper installation instructions included with the equipment.
Page 153: Warning Lights, Gauges, And Indicators
The power outlet is not designed for and may not work properly, if the following are plugged in: Equipment with high initial peak wattage such as: compressor-driven refrigerators and electric power tools. Other equipment requiring an extremely stable power supply such as: microcomputer-controlled electric blankets, touch sensor...
Page 154: Instrument Cluster
5-12 Instruments and Controls Instrument Cluster English 6 Speed Shown, Metric and 2500 Series Similar...
Page 155: Speedometer
If the vehicle is a hybrid, see the hybrid supplement for more information. Speedometer The speedometer shows the vehicle speed in both kilometers per hour (km/h) and miles per hour (mph). Odometer The odometer shows how far the vehicle has been driven, in either kilometers or miles.
Page 156: Engine Oil Pressure
5-14 Instruments and Controls English The fuel gauge, when the ignition is on, shows how much fuel the vehicle has left in the tank. An arrow on the fuel gauge indicates the side of the vehicle the fuel door is on. The gauge first indicates empty before the vehicle is out of fuel, and the vehicle's fuel tank should be...
Page 157 English The oil pressure gauge shows the engine oil pressure in psi (pounds per square inch) when the engine is running. Canadian vehicles indicate pressure in kPa (kilopascals). Instruments and Controls Oil pressure may vary with engine speed, outside temperature and oil viscosity, but readings above the low pressure zone indicate the normal operating range.
Page 158: Engine Coolant Temperature
5-16 Instruments and Controls Engine Coolant Temperature Gauge Metric English This gauge shows the engine coolant temperature. It also provides an indicator of how hard the vehicle is working. During a majority of the operation, the gauge reads 100°C (210°F) or less. If you are pulling a load or going up hills, it is normal for the temperature to fluctuate and approach the 122°C...
Page 159: Safety Belt Reminders
When the engine is running, the gauge shows the condition of the charging system. The charging system regulates voltage based on the state of the battery for improved fuel economy and battery life. The gauge may transition from a higher to lower or a lower to higher reading, this is normal.
Page 160: Airbag Readiness Light
5-18 Instruments and Controls This chime and light are repeated if the passenger remains unbuckled and the vehicle is in motion. If the passenger safety belt is buckled, neither the chime nor the light comes on. The front passenger safety belt warning light and chime may turn on if an object is put on the seat such as a briefcase, handbag, grocery...
Page 161: Passenger Airbag Status
Passenger Airbag Status Indicator If the vehicle has the airbag status indicator pictured in the following illustration, then the vehicle has a passenger sensing system for the right front passenger position. The passenger airbag status indicator is on the overhead console. See Passenger Sensing System on page 3 45 for important safety information.
Page 162: Charging System Light
5-20 Instruments and Controls If, after several seconds, both status indicator lights remain on, or if there are no lights at all, there may be a problem with the lights or the passenger sensing system. See your dealer for service. WARNING If the airbag readiness light ever comes on and stays on, it means...
Page 163: Malfunction
Malfunction Indicator Lamp A computer system called OBD II (On-Board Diagnostics-Second Generation) monitors operation of the fuel, ignition, and emission control systems. It ensures that emissions are at acceptable levels for the life of the vehicle, helping to produce a cleaner environment. This light should come on when the ignition is on, but the engine is not running, as a check to show it is...
Page 164 5-22 Instruments and Controls To prevent more serious damage to the vehicle: Reduce vehicle speed. Avoid hard accelerations. Avoid steep uphill grades. If towing a trailer, reduce the amount of cargo being hauled as soon as it is possible. If the light continues to flash, when it is safe to do so, stop the vehicle.
Page 165: Brake System Warning
Emissions Inspection and Maintenance Programs Some state/provincial and local governments may have programs to inspect the on-vehicle emission control equipment. For the inspection, the emission system test equipment is connected to the vehicle s Data Link Connector (DLC). The DLC is under the instrument panel to the left of the steering wheel.
Page 166: Antilock Brake System (Abs)
5-24 Instruments and Controls Metric English This light comes on briefly when the ignition key is turned to ON/RUN. If it does not come on then, have it fixed so it is ready to warn if there is a problem. WARNING The brake system might not be working properly if the brake...
Page 167: Tow/Haul Mode Light
For vehicles with a Driver Information Center (DIC), see Brake System Messages on page 5 38 for all brake related DIC messages. If the vehicle is a hybrid, see the hybrid supplement for more information. Tow/Haul Mode Light For vehicles with the Tow/Haul Mode feature, this light comes on when the Tow/Haul Mode has been activated.
Page 168: Engine Oil Pressure Light
5-26 Instruments and Controls When the Light Is On Steady This indicates that one or more of the tires are significantly underinflated. A tire pressure message can accompany the light. See Tire Messages on page 5 45 for more information. Stop as soon as possible, and inflate the tires to the pressure value shown on the Tire and Loading Information label.
Page 169: Low Fuel Warning Light
Low Fuel Warning Light This light, under the fuel gauge, comes on briefly while the engine is being started. This light and a chime come on when the fuel tank is low on fuel. The Driver Information Center also displays a FUEL LEVEL LOW message.
Page 170: Cruise Control Light
5-28 Instruments and Controls Cruise Control Light The cruise control light comes on whenever the cruise control is set. The light goes out when the cruise control is turned off. See Cruise Control on page 9 57 for more information. Information Displays Driver Information Center (DIC)
Page 171 DIC Buttons The buttons are the trip/fuel, vehicle information, customization, and set/ reset buttons. The button functions are detailed in the following pages. (Trip/Fuel): Press to display the odometer, trip odometer, fuel range, average economy, fuel used, timer, instantaneous economy and Active Fuel Management indicator, and transmission temperature.
Page 172 5-30 Instruments and Controls The trip odometer can be reset to zero by pressing the set/reset button while the trip odometer is displayed. You can also reset the trip odometer while it is displayed by pressing and holding the trip odometer reset stem.
Page 173 Timer Press the trip/fuel button until TIMER displays. This display can be used as a timer. To start the timer, press the set/ reset button while TIMER is displayed. The display will show the amount of time that has passed since the timer was last reset, not including time the ignition is off.
Page 174: Vehicle Information Menu
5-32 Instruments and Controls Vehicle Information Menu Items (With DIC Buttons) (Vehicle Information): Press to scroll through the following menu items: Oil Life Press the vehicle information button until OIL LIFE REMAINING displays. This display shows an estimate of the oil's remaining useful life.
Page 175 TIRES kPa (PSI) LEFT ## RIGHT ##. Press the vehicle information button again until the DIC displays REAR TIRES kPa (PSI) LEFT ## RIGHT ##. If a low tire pressure condition is detected by the system while driving, a message advising you to add pressure in a specific tire will appear in the display.
Page 176 5-34 Instruments and Controls Trip Odometer Press the trip odometer reset stem until TRIP displays. This display shows the current distance traveled in either kilometers (km) or miles (mi) since the last reset for the trip odometer. The trip odometer can be reset to zero by pressing and holding the trip odometer reset stem while the trip odometer is displayed.
Page 177 Trip Odometer Reset Stem Menu Items (Without DIC Buttons) Language This display allows you to select the language in which the DIC messages will appear. To select a language: 1. Press the trip odometer reset stem until ODOMETER displays. 2. While in the ODOMETER display, press and hold the trip odometer reset stem for three seconds until the currently...
Page 178 5-36 Instruments and Controls Trailer Gain and Output On vehicles with the Integrated Trailer Brake Control (ITBC) system, the trailer brake display appears in the DIC. Press the trip odometer reset stem until TRAILER GAIN and OUTPUT display. TRAILER GAIN shows the trailer gain setting.
Page 179: Vehicle Messages
Relearn Tire Positions Your vehicle may have this display. To access this display, the vehicle must be in P (Park). If your vehicle has the Tire Pressure Monitor System (TPMS), after rotating the tires or after replacing a tire or sensor, the system must re-learn the tire positions.
Page 180: Brake System Messages
5-38 Instruments and Controls SERVICE BATTERY CHARGING SYSTEM On some vehicles, this message displays if there is a problem with the battery charging system. Under certain conditions, the charging system light may also turn on in the instrument panel cluster. See Charging System Light on page 5 20.
Page 181: Door Ajar Messages
Door Ajar Messages DRIVER DOOR OPEN This message displays and a chime sounds if the driver door is not fully closed and the vehicle is shifted out of P (Park). Stop and turn off the vehicle, check the door for obstructions, and close the door again.
Page 182: Engine Cooling System
5-40 Instruments and Controls Engine Cooling System Messages ENGINE HOT A/C (Air Conditioning) TURNED OFF This message displays when the engine coolant becomes hotter than the normal operating temperature. See Engine Coolant Temperature Gauge on page 5 16. To avoid added strain on a hot engine, the air conditioning compressor automatically turns off.
Page 183: Engine Oil Messages
Engine Oil Messages CHANGE ENGINE OIL SOON This message displays when the engine oil needs to be changed. When you change the engine oil, be sure to reset the CHANGE ENGINE OIL SOON message. See Engine Oil Life System on page 10 11 for information on how to reset the message.
Page 184: Fuel System Messages
5-42 Instruments and Controls Fuel System Messages FUEL LEVEL LOW This message displays and a chime sounds if the fuel level is low. Refuel as soon as possible. See Fuel Gauge on page 5 13 and Fuel on page 9 70 for more information. TIGHTEN GAS CAP This message may display along with the check engine light on the...
Page 185: Ride Control System
SERVICE PARK ASSIST If your vehicle has the Ultrasonic Rear Parking Assist (URPA) system, this message displays if there is a problem with the URPA system. Do not use this system to help you park. See Ultrasonic Parking Assist on page 9 60 for more information. See your dealer for service.
Page 186 5-44 Instruments and Controls SERVICE SUSPENSION SYSTEM ® If your vehicle has the Autoride suspension system, this message displays when the Autoride suspension system is not operating properly. Have your vehicle serviced by your dealer. SERVICE TRACTION CONTROL If your vehicle has StabiliTrak, this message displays when there is a problem with the Traction Control System (TCS).
Page 187: Airbag System Messages
TRACTION CONTROL OFF If your vehicle has StabiliTrak, this message displays when the Traction Control System (TCS) is turned off. Adjust your driving accordingly. See ® StabiliTrak System on page 9 54 for more information. Airbag System Messages SERVICE AIR BAG This message displays if there is a problem with the airbag system.
Page 188: Transmission Messages
5-46 Instruments and Controls TIRE LOW ADD AIR TO TIRE On vehicles with the Tire Pressure Monitor System (TPMS), this message displays when the pressure in one or more of the vehicle's tires needs to be checked. This message also displays LEFT FRT (left front), RIGHT FRT (right front), LEFT RR (left rear), or RIGHT RR (right rear) to indicate...
Page 189: Vehicle Reminder
Vehicle Reminder Messages CHECK TRAILER WIRING On vehicles with the Integrated Trailer Brake Control (ITBC) system, this message may display and a chime may sound when one of the following conditions exists: A trailer with electric brakes becomes disconnected from the vehicle.
Page 190: Vehicle Personalization
5-48 Instruments and Controls Washer Fluid Messages WASHER FLUID LOW ADD FLUID This message displays when the windshield washer fluid is low. Fill the windshield washer fluid reservoir as soon as possible. See Engine Compartment Overview on page 10 6 for the location of the windshield washer fluid reservoir.
Page 191 Feature Settings Menu Items The following are customization features that allow you to program settings to the vehicle: DISPLAY IN ENGLISH This feature will only display if a language other than English has been set. This feature allows you to change the language in which the DIC messages appear to English.
Page 192 5-50 Instruments and Controls To select a setting, press the set/ reset button while the desired setting is displayed on the DIC. AUTO DOOR UNLOCK This feature allows you to select whether or not to turn off the automatic door unlocking feature. It also allows you to select which doors and when the doors will automatically unlock.
Page 193 To select a setting, press the set/ reset button while the desired setting is displayed on the DIC. REMOTE DOOR UNLOCK This feature allows you to select the type of feedback you will receive when unlocking the vehicle with the Remote Keyless Entry (RKE) transmitter.
Page 194 5-52 Instruments and Controls EXIT LIGHTING This feature allows you to select the amount of time you want the exterior lamps to remain on when it is dark enough outside. This happens after the key is turned from ON/RUN to LOCK/OFF. Press the customization button until EXIT LIGHTING appears on the DIC display.
Page 195 CHIME VOLUME This feature allows you to select the volume level of the chime. Press the customization button until CHIME VOLUME appears on the DIC display. Press the set/reset button once to access the settings for this feature. Then press the customization button to scroll through the following settings: NORMAL: The chime volume will...
Page 196 5-54 Instruments and Controls Press the customization button until EASY EXIT RECALL appears on the DIC display. Press the set/reset button once to access the settings for this feature. Then press the customization button to scroll through the following settings: DOOR BUTTON ONLY: No automatic seat exit recall will occur.
Page 197 Press the customization button until MEMORY SEAT RECALL appears on the DIC display. Press the set/ reset button once to access the settings for this feature. Then press the customization button to scroll through the following settings: OFF (default): No remote memory seat recall will occur.
Page 198: Universal Remote System
5-56 Instruments and Controls DO NOT RESTORE: The customization features will not be set to their factory default settings. To select a setting, press the set/ reset button while the desired setting is displayed on the DIC. EXIT FEATURE SETTINGS This feature allows you to exit the feature settings menu.
Page 199 This system provides a way to replace up to three remote control transmitters used to activate devices such as garage door openers, security systems, and home automation devices. Do not use this system with any garage door opener that does not have the stop and reverse feature.
Page 200 5-58 Instruments and Controls 2. In the garage, locate the garage door opener receiver (motor-head unit). Find the Learn or Smart button. It can usually be found where the hanging antenna wire is attached to the motor-head unit and may be a colored button. Press this button.
Page 201 To program up to three devices: 1. To verify that the garage door opener is a Fixed Code unit, remove the battery cover on the hand-held transmitter supplied by the manufacturer of the garage door opener motor. If there is a row of dip switches similar to the graphic above, the garage door opener is a Fixed Code unit.
Page 202 5-60 Instruments and Controls The switch positions on the hand-held transmitter could be labeled as follows: A switch in the up position could be labeled as Up, +, or On. A switch in the down position could be labeled as Down, , or Off.
Page 203: Universal Remote System Operation
4. The indicator lights will blink slowly. Enter each switch setting from Step 2 into your vehicle's Universal Home Remote. You will have two and one-half minutes to complete Step 4. Now press one button on the Universal Home Remote for each switch setting as follows: If you wrote Left, press the left button (A) in the...
Page 204 5-62 Instruments and Controls Erasing Universal Home Remote Buttons The programmed buttons should be erased when the vehicle is sold or the lease ends. To erase either Rolling Code or Fixed Code settings on the Universal Home Remote device: 1. Press and hold the two outside buttons at the same time for approximately 20 seconds, until the indicator lights, located...
Page 215 Infotainment ....7-1 Theft-Deterrent Feature ..7-2 Operation ..... 7-3 AM-FM Radio .
Page 216: Vehicle Identification
To minimize taking your eyes off the road while driving, do the following while the vehicle is parked: Become familiar with the operation and controls of the audio system. Set up the tone, speaker adjustments, and preset radio stations. For more information, see This vehicle's audio system may be equipped with a noise reduction system which can work improperly if...
Page 218 The vehicle has one of these radios as its audio system. Vehicles with a USB, CD, and DVD ® radio have a Bose Surround Sound System. Some of its features are explained later in this section under, Adjusting the Speakers (Balance/Fade) .
Page 219 Press to switch the display between the radio station frequency and the time. While the ignition is off, press this button to display the time. Press to display additional text information related to the current FM-RDS or XM station; or CD, MP3, or WMA song.
Page 220 To adjust the bass, midrange, or treble: 1. Press the knob until the tone control tabs display. 2. Highlight the desired tone control tab by doing one of the following: Pressing the knob. Press the softkey under the desired tab. 3.
Page 221 Select this setting to enable Bose Centerpoint. Centerpoint signal processing produces a surround sound listening experience from a CD or XM stereo digital audio source. Centerpoint delivers five independent audio channels from conventional two channel stereo recordings. (Not available for AM or FM.) adjust the balance or fade: 1.
Page 222 For radios with the Radio Data System (RDS) feature, it only works with FM stations that broadcast RDS information. This system relies upon receiving specific information from these stations and only works when the information is available. While the radio is tuned to an FM-RDS station, the station name or call letters displays.
Page 223: Radio
Up to 36 stations can be programmed as favorites using the 6 softkeys below the radio station frequency tabs and by using the FAV button. Press the FAV button to go through up to 6 pages of favorites, each having 6 favorite stations available per page.
Page 224 For vehicles with XM, press to display additional text information related to the current XM channel. If information is available, the song title information displays on the top line of the display and artist information displays on the bottom line. When information is not available, NO INFO displays.
Page 225 Categories cannot be added or removed while the vehicle is moving faster than 8 km/h (5 mph). To add or remove a category: 1. Press the MENU button. 2. Press the softkey located below the XM CAT tab. 3. Turn the knob to display the category to add or remove.
Page 226 4. Press the FAV button, or let the menu time out, to return to the original main radio screen showing the radio station frequency tabs and to begin the process of programming favorites. These channels, or any others, can be blocked at a customer's request, by calling 1-800-929-2100 in the U.S.
Page 227 message is received after having the vehicle serviced, check with your dealer. If tuned to channel 0, this message alternates with the XM Radio eight digit radio ID label. This label is needed to activate the service. If this message is received when tuned to channel 0, there could be a receiver fault.
Page 228 Cellular phone usage may cause interference with the vehicle's radio. This interference may occur when making or receiving phone calls, charging the phone's battery, or simply having the phone on. This interference causes an increased level of static while listening to the radio.
Page 229 Do not add any label to a CD. It could get caught in the CD. If a CD is recorded on a personal computer and a description label is needed, try labeling the top of the recorded CD with a marking pen. The use of CD lens cleaners for CDs is not advised, due to the risk of contaminating the lens of the CD...
Page 230: Audio Players
If the ignition or radio is turned off, with a CD in the player, it stays in the player. When the ignition or radio is turned on, the CD starts playing where it stopped, if it was the last selected audio source. The CD is controlled by the buttons on the radio faceplate or by the RSA unit.
Page 231 The Radio with CD (MP3) and the Radio with USB and CD (MP3), have the capability of playing an MP3 CD-R or CD-RW disc. Radios that have the capability of playing MP3s can play .mp3 or .wma files that were recorded onto a CD-R or CD-RW disc.
Page 232 The song name that displays is the song name that is contained in the ID3 tag. If the song name is not present in the ID3 tag, then the radio displays the file name without the extension (such as .mp3) as the track name.
Page 233 Press and hold to advance playback quickly. Sound is heard at a reduced volume and the elapsed time of the file displays. Release FWD to resume playing. The elapsed time of the file displays. Press the softkey below the tab to go to the first track in the previous folder.
Page 234 If this message displays and/or the CD ejects, it could be for one of the following reasons: It is very hot. When the temperature returns to normal, the CD should play. The road is very rough. When the road becomes smoother, the CD should play.
Page 235 protective cases and away from direct sunlight and dust. The CD or DVD player scans the bottom surface of the disc. If the surface of a disc is damaged, such as cracked, broken, or scratched, the disc does not play properly or not at all. Do not touch the bottom side of a disc while handling it;...
Page 236 Press and release to eject the disc that is currently playing in the top slot. A beep sounds and Ejecting Disc displays. If loading and reading of a disc cannot be completed, due to unknown format, etc., and the disc fails to eject, press and hold for more than five seconds to force the disc to eject.
Page 237 Press to display additional text information related to the current song. If information is available, the song title information displays on the top line of the display and artist information displays on the bottom line. When information is not available, NO INFO displays.
Page 238 Up to 40 sessions. Playlists with an .m3u or .wpl extension. Files with an .mp3, .wma, or .cda file extension. The CD player supports: Up to 512 files and folders. Up to 8 folders in depth. Playlists with an .m3u or .wpl extension.
Page 239 When play enters a new folder, the display does not automatically show the new folder name unless the folder mode has been chosen as the default display. The new track name displays. The song name that displays is the song name that is contained in the ID3 tag.
Page 240 To use random: 1. Press the softkey under the RDM tab until Random Current Disc displays 2. Press the same softkey again to turn off random play. Press the softkey below the tab to play files in order by artist or album. The player scans the disc to sort the files by artist and album ID3 tag information.
Page 241 If an error message displays on the video screen or the radio, see DVD Display Error Messages under, , and CD/DVD Player Messages later in this section for more information. Insert a disc partway into the top slot, label side up. The player pulls it in and the disc should begin playing.
Page 242 Press to turn the radio on or off. Turn clockwise or counterclockwise to increase or decrease the volume. Press and hold for more than two seconds to turn off the entire radio and Rear Seat Entertainment (RSE) system and to start the Parental Control feature.
Page 243 If the DVD still does not play, refer to the on-screen instructions, if available. Press to stop playing, rewinding, or fast forwarding a DVD. Press to select the choices that are highlighted in any menu. Press to access the DVD menu. The DVD menu is different on every DVD.
Page 244 The rear seat passenger can navigate the DVD-V and DVD-A menus and controls through the remote control. See Remote Control under for more information. The video screen automatically turns on when the DVD-V is inserted into the DVD slot, and does not automatically power on when the DVD-A is inserted into the DVD slot.
Page 245 If the disc is not playing correctly, for any other reason, try a known good disc. If any error occurs repeatedly or if an error cannot be corrected, contact your dealer. If the radio displays an error message, write it down and provide it to your dealer when reporting the problem.
Page 246 If a front auxiliary device is connected, the DVD/CD AUX button cycles through all available options, such as: DVD slot, CD slot, Front Auxiliary, and Rear Auxiliary (if available). See Using the Auxiliary Input Jack(s) in this section, or Audio/Video (A/V) Jacks under, for more information.
Page 247 appears on the radio display. The iPod music appears on the radio s display and begins playing. The iPod charges while it is connected to the vehicle if the vehicle is in the ACC/ACCESSORY or ON/RUN position. When the vehicle is turned off, the iPod automatically powers off and will not charge or draw power from the vehicle's battery.
Page 248 Press the softkey below to view the contents of the current folder on the USB drive. To browse and select files: 1. Press the softkey below 2. Turn to scroll through the list of folders. 3. Press to select the desired folder.
Page 249 To use Repeat: Press the softkey below to select between Repeat All and Repeat Track. Press the softkey below to repeat all tracks. The tab appears lowered when Repeat All is being used. This is the default mode when a USB storage device or iPod is first connected.
Page 250 The RSE is designed for rear seat passengers only. The driver cannot safely view the video screen while driving and should not try to do so. In severe or extreme weather conditions, the RSE system might not work until the temperature is within the operating range.
Page 251 These headphones can be used to listen to the radio, CDs, DVDs, MP3s, DVD As, or any auxiliary source connected to A/V jacks or the auxiliary input jack, if the vehicle has this feature. The wireless headphones have an On/Off button, channel 1 or 2 switch, and a volume control.
Page 252 To change the batteries on the headphones: 1. Turn the screw to loosen the battery door located on the left side of the headphones. Slide the battery door open. 2. Replace the two batteries in the compartment. Make sure that they are installed correctly, using the diagram on the inside of the battery compartment.
Page 253 more information about changing the source. The screen display mode (normal, full, and zoom), screen brightness, and setup menu language can be changed from the on screen setup menu. To change any feature: 1. Press the (display menu) button on the remote control. 2.
Page 254 If a DVD is playing and the screen is raised to its locked position, the screen remains on. This is normal, and the DVD continues to play through the previous audio source. Use the remote control power button or eject the disc to turn off the screen.
Page 255 If the remote control becomes lost or damaged, a new universal remote control can be purchased. If this happens, make sure the universal remote control uses a ® code set of Toshiba Press this button to turn the video screen on and off. Press this button to turn the remote control backlight on.
Page 256 Press this button to return to the start of the current track or chapter. Press this button again to go to the previous track or chapter. This button might not work when the DVD is playing the copyright information or the previews. Press this button to go to the beginning of the next chapter or track.
Page 257 If the vehicle has a third row video screen, the AUX button controls the source display on the second row video screen, and the third row video screen as described in the table below: Default State (No Media Media Press) First Aux Video Aux Video...
Page 258 There is no power. The picture does not fill the screen. There are black borders on the top and bottom or on both sides, or the picture looks stretched out. In auxiliary mode, the picture moves or scrolls. The remote control does not work. After stopping the player, and pushing Play, sometimes the DVD starts where it left off and sometimes at the beginning.
Page 259 Sometimes the wireless headphone audio cuts out or buzzes. The remote and/or the headphones are lost. The DVD is playing, but there is no picture or sound. The DVD display error message depends on the radio that is in the vehicle.
Page 260 When cleaning the video screen, use only a clean cloth dampened with clean water. Use care when directly touching or cleaning the screen, as damage could result. Vehicles with this feature allow the rear seat passengers to listen to and control any of the music sources: radio, CDs, DVDs, or other auxiliary sources.
Page 261 Press this button to switch between the radio (AM/ FM), XM (if equipped), CD, and if the vehicle has these features, DVD, front auxiliary, and rear auxiliary. When listening to FM, AM, or XM (if equipped), press the left or right seek arrow to go to the previous or to the next station or channel and stay there.
Page 262 For vehicles equipped with Bluetooth capability, the system can interact with many cell phones, allowing: Placement and receipt of calls in a hands-free mode. Sharing of the cell phone s address book or contact list with the vehicle. To minimize driver distraction, before driving, and with the vehicle parked: Become familiar with the...
Page 263: Phone
The Bluetooth system uses voice recognition to interpret voice commands to dial phone numbers and name tags. For additional information, say Help while you are in a voice recognition menu. Keep interior noise levels to a minimum. The system may not recognize voice commands if there is too much background noise.
Page 264 Pairing only needs to be completed once, unless the pairing information on the cell phone changes or the cell phone is deleted from the system. Only one paired cell phone can be connected to the Bluetooth system at a time. If multiple paired cell phones are within range of the system, the system connects to the first...
Page 265 To connect to a different cell phone, the Bluetooth system looks for the next available cell phone in the order in which all the available cell phones were paired. Depending on which cell phone you want to connect to, you may have to use this command several times.
Page 266 3. Say each digit, one at a time, that you want to store. After each digit is entered, the system repeats back the digit it heard followed by a tone. After the last digit has been entered, say Store, and then follow the directions given by the system to save a name tag for this number.
Page 267 If an unwanted number is recognized by the system, say Clear at any time to clear the last number. To hear all of the numbers recognized by the system, say Verify at any time. 1. Press and hold two seconds. 2.
Page 268 Press to end a call. During a call, all sounds from inside the vehicle can be muted so that the person on the other end of the call cannot hear them. To mute a call, press , and then say Mute call. To cancel mute, press and then say Un mute call.
Page 269 The Bluetooth system can send numbers and the numbers stored as name tags during a call. You can use this feature when calling a menu driven phone system. Account numbers can also be stored for use. 1. Press . The system responds Ready, followed by a tone.
Page 285 Driving and Operating Driving Information Defensive Driving ... . . 9-2 Drunk Driving ....9-3 Control of a Vehicle .
Page 286: Driving Information
Driving and Operating Fuel Fuel ......9-70 Recommended Fuel ..9-70 Gasoline Specifications (U.S.
Page 287: Drunk Driving
Drunk Driving WARNING Drinking and then driving is very dangerous. Your reflexes, perceptions, attentiveness, and judgment can be affected by even a small amount of alcohol. You can have a serious or even fatal collision if you drive after drinking. Do not drink and drive or ride with a driver who has been drinking.
Page 288: Braking
Driving and Operating Braking Braking action involves perception time and reaction time. Deciding to push the brake pedal is perception time. Actually doing it is reaction time. Average reaction time is about three fourths of a second. But that is only an average.
Page 289: Steering Tips
Steering Tips It is important to take curves at a reasonable speed. Traction in a curve depends on the condition of the tires and the road surface, the angle at which the curve is banked, and vehicle speed. While in a curve, speed is the one factor that can be controlled.
Page 290: Off-Road Recovery
Driving and Operating Off-Road Recovery The vehicle's right wheels can drop off the edge of a road onto the shoulder while driving. If the level of the shoulder is only slightly below the pavement, recovery should be fairly easy. Ease off the accelerator and then, if there is nothing in the way, steer so that the vehicle straddles the edge of the...
Page 291: Off-Road Driving
While driving on a surface with reduced traction, try to avoid sudden steering, acceleration, or braking, including reducing vehicle speed by shifting to a lower gear. Any sudden changes could cause the tires to slide. You might not realize the surface is slippery until the vehicle is skidding.
Page 292 Driving and Operating Make sure all underbody shields, if the vehicle has them, are properly attached. Know the local laws that apply to off-roading where you will be driving or check with law enforcement people in the area. Be sure to get the necessary permission if you will be on private land.
Page 293 WARNING (Continued) Heavy loads on the roof raise the vehicle's center of gravity, making it more likely to roll over. You can be seriously or fatally injured if the vehicle rolls over. Put heavy loads inside the cargo area, not on the roof.
Page 294 9-10 Driving and Operating For vehicles with a winch, be sure to read the winch instructions. In a remote area, a winch can be handy if you get stuck but you will want to know how to use it properly. Getting Familiar with Off-Road Driving It is a good idea to practice in an...
Page 295: Driving On Hills
Some things to consider: Is the path ahead clear? Will the surface texture change abruptly up ahead? Does the travel take you uphill or downhill? Will you have to stop suddenly or change direction quickly? When driving over obstacles or rough terrain, keep a firm grip on the steering wheel.
Page 296: Driving Uphill
9-12 Driving and Operating Consider this as you approach a hill: Is there a constant incline, or does the hill get sharply steeper in places? Is there good traction on the hillside, or will the surface cause tire slipping? Is there a straight path up or down the hill so you will not have to make turning maneuvers?
Page 297 WARNING Driving to the top (crest) of a hill at full speed can cause an accident. There could be a drop-off, embankment, cliff, or even another vehicle. You could be seriously injured or killed. As you near the top of a hill, slow down and stay alert.
Page 298: Driving Downhill
9-14 Driving and Operating If, after stalling, you try to back down the hill and decide you just cannot do it, set the parking brake, put your transmission in P (Park), and turn off the engine. Leave the vehicle and go get some help. Exit on the uphill side and stay clear of the path the vehicle would take if it rolled downhill.
Page 299: Driving Across An Incline
Things not to do when driving down a hill: When driving downhill, avoid turns that take you across the incline of the hill. A hill that is not too steep to drive down might be too steep to drive across. The vehicle could roll over.
Page 300 9-16 Driving and Operating For these reasons, carefully consider whether to try to drive across an incline. Just because the trail goes across the incline does not mean you have to drive it. The last vehicle to try it might have rolled over.
Page 301 WARNING Driving on frozen lakes, ponds, or rivers can be dangerous. Underwater springs, currents under the ice, or sudden thaws can weaken the ice. Your vehicle could fall through the ice and you and your passengers could drown. Drive your vehicle on safe surfaces only.
Page 302: Driving On Wet Roads
9-18 Driving and Operating Driving on Wet Roads Rain and wet roads can reduce vehicle traction and affect your ability to stop and accelerate. Always drive slower in these types of driving conditions and avoid driving through large puddles and deep standing or flowing water.
Page 303: Hill And Mountain Roads
Other driving tips include: Keep the vehicle well ventilated. Keep interior temperature cool. Keep your eyes moving scan the road ahead and to the sides. Check the rearview mirror and vehicle instruments often. Hill and Mountain Roads Driving on steep hills or through mountains is different than driving on flat or rolling terrain.
Page 304: Winter Driving
9-20 Driving and Operating Winter Driving Driving on Snow or Ice Drive carefully when there is snow or ice between the tires and the road, creating less traction or grip. Wet ice can occur at about 0°C (32°F) when freezing rain begins to fall, resulting in even less traction.
Page 305 WARNING (Continued) If the vehicle is stuck in the snow: Clear away snow from around the base of your vehicle, especially any that is blocking the exhaust pipe. Check again from time to time to be sure snow does not collect there. Open a window about 5 cm (2 in) on the side of the vehicle that is away from the...
Page 306: If The Vehicle Is Stuck
9-22 Driving and Operating If the Vehicle Is Stuck Slowly and cautiously spin the wheels to free the vehicle when stuck in sand, mud, ice, or snow. If the vehicle has a traction system, it can often help to free a stuck vehicle.
Page 307: Vehicle Load Limits
Never use recovery hooks to tow the vehicle. Your vehicle could be damaged and it would not be covered by warranty. For vehicles with recovery hooks at the front of the vehicle, you can use them if you are stuck off-road and need to be pulled to some place where you can continue driving.
Page 308 9-24 Driving and Operating Tire and Loading Information Label Label Example A vehicle specific Tire and Loading Information label is attached to the center pillar (B-pillar). With the driver door open, you will find the label attached below the door lock post (striker).
Page 309 The resulting figure equals the available amount of cargo and luggage load capacity. For example, if the XXX amount equals 1400 lbs and there will be five 150 lb passengers in your vehicle, the amount of available cargo and luggage load capacity is 650 lbs (1400 750 (5 x 150) = 650 lbs).
Page 310 9-26 Driving and Operating Example 2 A. Vehicle Capacity Weight for Example 2 = 453 kg (1,000 lbs) B. Subtract Occupant Weight @ 68 kg (150 lbs) × 5 = 136 kg (750 lbs) C. Available Cargo Weight = 113 kg (250 lbs) Example 3 A.
Page 311 Certification/Tire Label A vehicle specific Certification/ Tire label is found on the rear edge of the driver door. The label shows the size of your vehicle's original tires and the inflation pressures needed to obtain the gross weight capacity of your vehicle. This is called Gross Vehicle Weight Rating (GVWR).
Page 312: Child Restraints
9-28 Driving and Operating Using heavier suspension components to get added durability might not change your weight ratings. Ask your dealer to help you load your vehicle the right way. If you put things inside your vehicle like suitcases, tools, packages, or anything else they go as fast as the...
Page 313: Starting And Operating
Starting and Operating New Vehicle Break-In The vehicle does not need an elaborate break-in. But it will perform better in the long run if you follow these guidelines: Keep the vehicle speed at 88 km/h (55 mph) or less for the first 805 km (500 miles).
Page 314: Ignition Positions
9-30 Driving and Operating Before you start driving, fully press the brake pedal to confirm the adjustment is right for you. While driving, make only small adjustments. The vehicle may have a memory function which lets pedal settings be saved and recalled. See more information.
Page 315: Starting The Engine
WARNING Turning off the vehicle while moving may cause loss of power assist in the brake and steering systems and disable the airbags. While driving, only shut the vehicle off in an emergency. 5. If the vehicle must be shut off while driving, turn the ignition to ACC/ACCESSORY.
Page 316 9-32 Driving and Operating Starting Procedure 1. With your foot off the accelerator pedal, turn the ignition to START. When the engine starts, let go of the key. The idle speed will go down as the engine warms. Do not race the engine immediately after starting it.
Page 317: Engine Heater
Before adding electrical equipment, check with your dealer. If you do not, the engine might not perform properly. Any resulting damage would not be covered by the vehicle warranty. Engine Heater The engine coolant heater can provide easier starting and better fuel economy during engine warm-up in cold weather conditions at or below 18°C (0°F).
Page 318: Retained Accessory
9-34 Driving and Operating Retained Accessory Power (RAP) The following vehicle accessories can be used for up to 10 minutes after the engine is turned off: Audio System Power Windows OnStar System (if equipped) Sunroof (if equipped) These features work when the key is in ON/RUN or ACC/ ACCESSORY.
Page 319: Torque Lock
Leaving the Vehicle With the Engine Running WARNING It can be dangerous to leave the vehicle with the engine running. The vehicle could move suddenly if the shift lever is not fully in P (Park) with the parking brake firmly set. If you have four-wheel drive and the transfer case is in N (Neutral), the vehicle will be free to roll,...
Page 320: Shifting Out Of Park
9-36 Driving and Operating Shifting out of Park This vehicle is equipped with an electronic shift lock release system. The shift lock release is designed to: Prevent ignition key removal unless the shift lever is in P (Park) with the shift lever button fully released.
Page 321: Active Fuel Management
Active Fuel Management Vehicles with V8 engines may have Active Fuel Management . This system allows the engine to operate on either all or half of its cylinders, depending on the driving conditions. When less power is required, such as cruising at a constant vehicle speed, the system will operate in the half cylinder mode, allowing the vehicle to achieve better fuel...
Page 322: Running The Vehicle While
9-38 Driving and Operating Running the Vehicle While Parked It is better not to park with the engine running. But if you ever have to, here are some things to know. WARNING Idling a vehicle in an enclosed area with poor ventilation is dangerous.
Page 323: Automatic Transmission
Automatic Transmission If the vehicle is a hybrid, see the hybrid supplement for more information. If the vehicle is has an automatic transmission, it has an electronic shift position indicator within the instrument panel cluster. This display comes on when the ignition key is turned to the ON/RUN position.
Page 324 9-40 Driving and Operating R (Reverse): Use this gear to back up. Shifting to R (Reverse) while the vehicle is moving forward could damage the transmission. The repairs would not be covered by the vehicle warranty. Shift to R (Reverse) only after the vehicle is stopped.
Page 325 The vehicle has a shift stabilization feature that adjusts the transmission shifting to the current driving conditions in order to reduce rapid upshifts and downshifts. This shift stabilization feature is designed to determine, before making an upshift, if the engine is able to maintain vehicle speed by analyzing things such as vehicle speed, throttle position, and vehicle load.
Page 326: Manual Mode
9-42 Driving and Operating 1 (First): This position reduces vehicle speed without using the brakes. You can use it for major/ severe downgrades and off-road driving where the vehicle would otherwise accelerate due to steepness of grade. When you shift to 1 (First) it provides the lowest gear appropriate to the vehicle's current road speed and continues to...
Page 327: Tow/Haul Mode
Grade Braking is not available when Range Selection Mode is active. While using Range Selection Mode, Cruise Control and the Tow/Haul Mode can be used. Spinning the tires or holding the vehicle in one place on a hill using only the accelerator pedal may damage the transmission.
Page 328 9-44 Driving and Operating Grade Braking (Hydra-Matic 6-Speed Automatic Transmission) The Grade Braking shift modes can be activated by pressing the button on the end of the shift control lever. While in Range Selection Mode, Grade Braking is deactivated allowing the driver to select a desired range of gears.
Page 329: Drive Systems
Drive Systems Four-Wheel Drive (Two Speed Automatic Transfer Case) If the vehicle has four-wheel drive, you can send the engine's driving power to all four wheels for extra traction. Read the following before using four-wheel drive. Driving on clean, dry pavement in Four-Wheel Drive High or Four-Wheel Drive Low for an extended period of time may...
Page 330 9-46 Driving and Operating You can choose among five driving settings: Indicator lights in the switches show you which setting you are in. The indicator lights will come on briefly when you turn on the ignition and the last chosen setting will stay on. If the lights do not come on, you should take the vehicle to your dealer for service.
Page 331 If the SERVICE 4 WHEEL DRIVE message stays on, you should take the vehicle to your dealer for service. See SERVICE 4 WHEEL DRIVE message under Shifting Into Four-Wheel Drive High or AUTO (Automatic Four-Wheel Drive) Turn the knob to the Four-Wheel Drive High or AUTO position.
Page 332 9-48 Driving and Operating Shifting Out of Four-Wheel Drive Low To shift from Four-Wheel Drive Low to Four-Wheel Drive High, AUTO, or Two-Wheel Drive High, the vehicle must be stopped or moving less than 5 km/h (3 mph) with the transmission in N (Neutral) and the ignition in ON/RUN.
Page 333 6. Turn the transfer case dial clockwise to N (Neutral) until it stops and hold it there until the N (Neutral) light starts blinking. This will take at least 10 seconds. Then slowly release the dial to the Four Wheel Drive Low position.
Page 334: Four-Wheel Drive
9-50 Driving and Operating Four-Wheel Drive (Single Speed Automatic Transfer Case) If the vehicle has four-wheel drive, you can send the engine's driving power to all four wheels for extra traction. Read the following before using four-wheel drive. Driving on clean, dry pavement in Four-Wheel Drive High for an extended period of time may cause premature wear...
Page 335 2 (Two-Wheel Drive High): This setting is used for driving in most street and highway situations. The front axle is not engaged in two-wheel drive. This setting also provides the best fuel economy. AUTO (Automatic Four-Wheel Drive): This setting is ideal for use when road surface traction conditions are variable.
Page 336: Antilock Brake
9-52 Driving and Operating Brakes Antilock Brake System (ABS) This vehicle has the Antilock Brake System (ABS), an advanced electronic braking system that helps prevent a braking skid. When the engine is started and the vehicle begins to drive away, ABS checks itself.
Page 337: Parking Brake
Parking Brake Set the parking brake by holding the regular brake pedal down, then pushing down the parking brake pedal. If the ignition is on, the brake system warning light will come on. Driving with the parking brake on can overheat the brake system and cause premature wear or damage to brake system parts.
Page 338: Ride Control Systems
9-54 Driving and Operating Ride Control Systems ® StabiliTrak System The vehicle has a vehicle stability enhancement system called StabiliTrak. It is an advanced computer-controlled system that assists the driver with directional control of the vehicle in difficult driving conditions. StabiliTrak activates when the computer senses a discrepancy between the intended path and the...
Page 339 The traction control disable button is located on the instrument panel. The traction control part of StabiliTrak can be turned off by pressing and releasing the StabiliTrak button if both systems (traction control and StabiliTrak) were previously on. To disable both TCS and StabiliTrak, press and hold until illuminates and the...
Page 340: Locking Rear Axle
9-56 Driving and Operating The traction control system is enabled automatically when the vehicle is started. It will activate and the StabiliTrak light will flash if it senses that any of the wheels are spinning or beginning to lose traction while driving. If traction control is turned off, only the brake-traction control portion of traction control will work.
Page 341: Automatic Level Control
Autoride also interact with the tow/ haul mode that, when activated, will provide additional control of the shock absorbers. This additional control results in better ride and handling characteristics when the vehicle is loaded or towing a trailer. See Tow/Haul Mode under for more information.
Page 342 9-58 Driving and Operating If the vehicle has StabiliTrak and the system begins to limit wheel spin, cruise control will automatically disengage. See . When road conditions allow the cruise control to be safely used again, it can be turned back on.
Page 343 Increasing Speed While Using Cruise Control If the cruise control system is already activated, Press and hold the +RES button on the steering wheel until the desired speed is reached, then release it. To increase vehicle speed in small amounts, press the +RES button.
Page 344: Object Detection Systems
9-60 Driving and Operating Object Detection Systems Ultrasonic Parking Assist For vehicles with the Ultrasonic Rear Parking Assist (URPA) system, it operates at speeds less than 8 km/h (5 mph), and assists the driver with parking and avoiding objects while in R (Reverse). The sensors on the rear bumper are used to detect the distance to an object up to 2.5 m (8 ft) behind the...
Page 345 The system can be disabled by pressing the rear park aid disable button located next to the radio. The indicator light will come on and PARK ASSIST OFF displays on the Driver Information Center (DIC) to indicate that URPA is off, see When the System Does Not Seem to Work Properly If the URPA system will not activate...
Page 346: Side Blind Zone
9-62 Driving and Operating Side Blind Zone Alert (SBZA) The vehicle may have a Side Blind Zone Alert (SBZA) system. Read this entire section before using the system. WARNING SBZA is only a lane changing aid and does not replace driver vision.
Page 347 How the System Works Left Side Mirror Right Side Mirror Display Display When the vehicle is started, both outside mirror displays will briefly come on to indicate that the system is operating. When the vehicle is moving forward, the left or right side mirror SBZA display will light up if a vehicle is detected in that blind zone.
Page 348 9-64 Driving and Operating The SBZA displays may remain on if a trailer is attached to the vehicle, or a bicycle or object is extending out to either side of the vehicle. When SBZA is disabled for any reason other than the driver turning it off, the driver will not be able to turn SBZA back on using the DIC.
Page 349: Rear Vision
Rear Vision Camera (RVC) This vehicle may have a Rear Vision Camera system. Read this entire section before using it. WARNING The Rear Vision Camera (RVC) system does not replace driver vision. RVC does not: Detect objects that are outside the camera's field of view, below the bumper, or underneath the vehicle.
Page 350 9-66 Driving and Operating Vehicles With Navigation System The rear vision camera system is designed to help the driver when backing up by displaying a view of the area behind the vehicle. When the driver shifts the vehicle into R (Reverse), the video image automatically appears on the navigation screen.
Page 351 (Brightness): Touch the + (plus) (minus) screen buttons to increase or decrease the brightness of the screen. (Contrast): Touch the + (plus) (minus) screen buttons to increase or decrease the contrast of the screen. Symbols The navigation system may have a feature that lets the driver view symbols on the navigation screen while using the rear vision camera.
Page 352 9-68 Driving and Operating Rear Vision Camera Location The image is provided by the camera located above the license plate. The camera uses a special lens. The distance of the image that appears on the screen differs from the actual distance. The area displayed by the camera is limited.
Page 353 When the System Does Not Seem To Work Properly The rear vision camera system might not work properly or display a clear image if: The RVC is turned off. See Turning the Rear Camera System On or Off earlier in this section.
Page 354: Fuel
9-70 Driving and Operating Fuel Use of the recommended fuel is an important part of the proper maintenance of this vehicle. To help keep the engine clean and maintain optimum vehicle performance, we recommend the use of gasoline advertised as TOP TIER Detergent Gasoline.
Page 355: Gasoline Specifications
Gasoline Specifications (U.S. and Canada Only) At a minimum, gasoline should meet ASTM specification D 4814 in the United States or CAN/CGSB 3.5 or 3.511 in Canada. Some gasolines contain an octane-enhancing additive called methylcyclopentadienyl manganese tricarbonyl (MMT). We recommend against the use of gasolines containing MMT.
Page 356: Fuel E85 (85% Ethanol)
9-72 Driving and Operating For customers who do not use TOP TIER Detergent Gasoline regularly, one bottle of GM Fuel System Treatment PLUS, added to the fuel tank at every engine oil change, can help clean deposits from fuel injectors and intake valves. GM Fuel System Treatment PLUS is the only gasoline additive recommended by General Motors.
Page 357 At a minimum, E85 should meet ASTM Specification D 5798. By definition, this means that fuel labeled E85 will have an ethanol content between 70% and 85%. Filling the fuel tank with fuel mixtures that do not meet ASTM specifications can affect driveability and could cause the malfunction indicator lamp to come on.
Page 358: Filling The Tank
9-74 Driving and Operating Filling the Tank WARNING Fuel vapor burns violently and a fuel fire can cause bad injuries. To help avoid injuries to you and others, read and follow all the instructions on the fuel pump island. Turn off the engine when refueling.
Page 359 WARNING Fuel can spray out on you if you open the fuel cap too quickly. If you spill fuel and then something ignites it, you could be badly burned. This spray can happen if the tank is nearly full, and is more likely in hot weather. Open the fuel cap slowly and wait for any hiss noise to stop.
Page 360: Filling A Portable Fuel
9-76 Driving and Operating Filling a Portable Fuel Container WARNING Never fill a portable fuel container while it is in the vehicle. Static electricity discharge from the container can ignite the fuel vapor. You can be badly burned and the vehicle damaged if this occurs.
Page 361 For information on towing a disabled vehicle, see . For information on towing the vehicle behind another vehicle such as a motor home, see Driving Characteristics and Towing Tips Pulling a Trailer Here are some important points: There are many different laws, including speed limit restrictions, having to do with trailering.
Page 362 9-78 Driving and Operating Driving with a Trailer WARNING When towing a trailer, exhaust gases may collect at the rear of the vehicle and enter if the liftgate, trunk/hatch, or rear-most window is open. Engine exhaust contains Carbon Monoxide (CO) which cannot be seen or smelled.
Page 363 Following Distance Stay at least twice as far behind the vehicle ahead as you would when driving the vehicle without a trailer. This can help to avoid heavy braking and sudden turns. Passing More passing distance is needed when towing a trailer. The combination will not accelerate as quickly and is longer so it is necessary to go much farther...
Page 364: Parking On Hills
9-80 Driving and Operating When towing at high altitude on steep uphill grades, consider the following: Engine coolant will boil at a lower temperature than at normal altitudes. If the engine is turned off immediately after towing at high altitude on steep uphill grades, the vehicle may show signs similar to engine overheating.
Page 365 WARNING It can be dangerous to get out of the vehicle if the shift lever is not fully in P (Park) with the parking brake firmly set. The vehicle can roll. If the engine has been left running, the vehicle can move suddenly.
Page 366: Trailer Towing
9-82 Driving and Operating Trailer Towing If the vehicle has a hybrid engine, see the Hybrid supplement for more information. Do not tow a trailer during break in. for more information. WARNING The driver can lose control when pulling a trailer if the correct equipment is not used or the vehicle is not driven properly.
Page 367 Use the following chart to determine how much the vehicle can weigh, based upon the vehicle model and options. Vehicle 1500 Series 2WD Short Wheel Base 5.3L V8 (LC9) 5.3L V8 (LMG) 5.3L V8 5.3L V8 K5L HD Cooling Pkg 1500 Series 2WD Long Wheel Base 5.3L V8 5.3L V8...
Page 368 9-84 Driving and Operating Vehicle 1500 Series 4WD Long Wheel Base 5.3L V8 (LC9) 5.3L V8 5.3L V8 K5L HD Cooling Pkg 2500 Series 2WD Long Wheel Base 6.0L V8 2500 Series 4WD Long Wheel Base 6.0L V8 *The Gross Combination Weight Rating (GCWR) is the total allowable weight of the completely loaded vehicle and trailer including any passengers, cargo, equipment and conversions.
Page 369 can tow. See for more information about the vehicle's maximum load capacity. Trailer tongue weight (A) should be 10 percent to 15 percent and fifth wheel or gooseneck kingpin weight should be 15 to 25 percent of the loaded trailer weight (B) up to the maximums for vehicle series and hitch type.
Page 370: Towing Equipment
9-86 Driving and Operating Total Weight on the Vehicle's Tires Be sure the vehicle's tires are inflated to the inflation pressures found on the Certification label on the drivers door or see for more information. Make sure not to exceed the GVWR limit for the vehicle, or the RGAWR, with the tow vehicle and trailer fully loaded for the trip including the weight of the...
Page 371 Safety Chains Always attach chains between the vehicle and the trailer. Cross the safety chains under the tongue of the trailer to help prevent the tongue from contacting the road if it becomes separated from the hitch. Instructions about safety chains may be provided by the hitch manufacturer or by the trailer manufacturer.
Page 372 9-88 Driving and Operating Heavy-Duty Trailer Wiring Harness Package The vehicle is equipped with the seven-wire trailer towing harness. This harness with a seven-pin universal trailer connector is attached to a bracket on the hitch platform. The seven-wire harness contains the following trailer circuits: Yellow: Left Stop/Turn Signal Dark Green: Right Stop/Turn...
Page 373 If the vehicle is equipped with an ITBC, the blunt cuts exist, but are not connected further in the harness. If an aftermarket trailer brake controller is installed, the ITBC must be disconnected. Do not power both ITBC and aftermarket controllers to control the trailer brakes at the same time.
Page 374 9-90 Driving and Operating Integrated Trailer Brake Control System The vehicle may have an Integrated Trailer Brake Control (ITBC) system for electric trailer brakes. This symbol is located on the Trailer Brake Control Panel on vehicles with an Integrated Trailer Brake Control System.
Page 375 When trailering, make sure of the following: The ITBC system is used only with trailers that are equipped with electric brakes. All applicable local and federal laws and regulations are followed. All electrical and mechanical connections to the trailer are made correctly.
Page 376 9-92 Driving and Operating The Trailer Brake Display Page can be displayed by performing any of the following actions: Scrolling through the DIC menu pages using the odometer trip stem or the DIC Vehicle Information button (if equipped). Pressing a Trailer Gain button If the Trailer Brake Display Page is not currently...
Page 377 There is a fault present in the wiring to the electric trailer brakes (a CHECK TRAILER WIRING message will also be displayed on the DIC). There is a fault in the ITBC system (a SERVICE TRAILER BRAKE SYSTEM message will also be displayed in the DIC).
Page 378 9-94 Driving and Operating In the Trailer Output display on the DIC, - - - - - - will disappear if there is no error present. Connecting a trailer without electric brakes will not clear the six dashed lines. 4. Adjust the Trailer Gain by using the gain adjustment (+ / -) buttons on the Trailer Brake Control Panel.
Page 379 2. There is an electrical fault in the wiring to the electric trailer brakes. This message will continue as long as there is an electrical fault in the trailer wiring. This message will also turn off if the driver acknowledges this message off. To determine if the electrical fault is on the vehicle side or trailer side of the trailer wiring harness...
Page 380: Conversions And Add-Ons
9-96 Driving and Operating Conversions and Add-Ons Add-On Electrical Equipment Do not add anything electrical to the vehicle unless you check with your dealer first. Some electrical equipment can damage the vehicle and the damage would not be covered by the vehicle's warranty.
Page 381 Here are some guidelines for safely carrying a snow plow on the vehicle: Make sure the weight on the front and rear axles does not exceed the axle rating for each. For the front axle, if more cargo or passengers must be carried, appropriate counter ballast must be installed rear of the rear axle.
Page 382 9-98 Driving and Operating In order to calculate the amount of weight any front accessory, such as a snow plow, is adding to the front axle, use the following formula: (W x (A + W.B.)) /W.B.= Weight the accessory is adding to the front axle.
Page 383 WARNING On some vehicles that have certain front mounted equipment, such as a snow plow, it may be possible to load the front axle to the front gross axle weight rating (GAWR) but not have enough weight on the rear axle to have proper braking performance.
Page 384 9-100 Driving and Operating NOTES...
Page 527 Accessories and Modifications ....10-3 Accessory Power ....9-34 ® Active Fuel Management .
Page 528 Battery ..... . . 10-29 Jump Starting ....10-88 Load Management .
Page 529: Customer Information
Climate Control Systems ..8-1 Air Conditioning ....8-1 Dual Automatic ....8-4 Heating .
Page 530 E85 Fuel ..... . . 9-72 Electrical Equipment, Add-On ..... . 9-96 Electrical System Engine Compartment Fuse Block .
Page 531: General Information
Fuel ......9-70 Additives .....9-71 E85 (85% Ethanol) .
Page 532: Jump Starting
Hood ......10-5 Horn ......5-5 How to Wear Safety Belts Properly .
Page 533: Scheduled Maintenance
Locks Automatic Door ....2-8 Delayed Locking ....2-8 Door ......2-7 Lockout Protection .
Page 534 Object Detection System Messages ....5-42 Object Detection, Side Blind Zone Alert (SBZA) ... 9-62 Odometer .
Page 535: Reporting Safety Defects
Radio Frequency Identification (RFID) ..13-19 Statement ....13-19 Radios AM-FM Radio ....7-8 CD/DVD Player .
Page 536 Safety Belts ....3-20 Care ......3-36 Extender .
Page 537 Stoplamps and Back-up Lamps Bulb Replacement ..10-38 Storage Rear ......4-2 Storage Areas Armrest .
Page 538 Trip Odometer ....5-13 Turn and Lane-Change Signals ......6-5 Turn Signal Bulb Replacement .

This manual is also suitable for:

2011 suburban 1500 2011 tahoe Suburban - annexe 33 2011 Tahoe - annexe 349 2011 2011 suburban

Chevrolet 2011 Suburban 2500 Owner's Manual

Table of Contents

Instruments and Controls

Driving and

Driving Information

Starting and Operating

Automatic Transmission

Drive Systems

Brakes

Ride Control Systems

Object Detection Systems

Conversions and Add-Ons

Quick Links

Chapters

Related Manuals for Chevrolet 2011 Suburban 2500

Summary of Contents for Chevrolet 2011 Suburban 2500

This manual is also suitable for:

Table of Contents