Chevrolet 2011 Volt Owner's Manual page 281

Voice Pass-Thru
Voice pass thru allows access to
the voice recognition commands on
the cell phone. See your cell phone
manufacturer's user guide to see if
the cell phone supports this feature.
To access contacts stored in the cell
phone:
1. Press . Say Hands Free
after the tone.
2. Say Bluetooth. The system
responds Bluetooth ready,
followed by a tone.
3. Say Voice. The system
responds OK, accessing
<phone name>.
The cell phone's normal prompt
messages will go through their
cycle according to the phone's
operating instructions.
Dual Tone Multi-Frequency
(DTMF) Tones
The Bluetooth system can send
numbers and numbers stored as
name tags during a call. Use this
feature when calling a menu-driven
phone system. Account numbers
can also be stored for use.
Sending a Number or Name Tag
During a Call
1. Press . The system
responds Ready, followed
by a tone.
2. Say Dial.
3. Say the number or name tag
to send.
Infotainment System
Clearing the System
Unless information is deleted out
of the in vehicle Bluetooth system,
it will be retained indefinitely.
This includes all saved name tags in
the phone book and phone pairing
information. For information on how
to delete this information, see the
previous sections on Deleting a
Paired Phone and Storing and
Deleting Phone Numbers.
7-91