Chevrolet 2011 Volt Owner's Manual page 198

7-8 Infotainment System
Entering a Point of Interest (POI)
To set a destination by entering a
Point of Interest (POI):
1. Press VOL/ to turn the
system on.
2. A caution could appear.
Press OK to proceed.
3. Press the DEST button.
4. Press the Point of Interest
screen button.
5. Enter the specific title of the
POI in the POI name space
(e.g., Washington Monument).
If four or fewer names are
available, a list displays. If more
than four are available, there is a
match counter with a number in
it, representing the number of
available POI names. Press the
List screen button to view the
list. Select the POI.
6. Press the Go screen button.
The system calculates the route.
7. Select the route preference for
Fastest, Shortest, or Easiest.
The system highlights the route.
8. Press the Start Guidance screen
button. The route is now ready
to be started.
See
more information on how to enter
a POI.
Storing Preset Destinations
1. Press VOL/ to turn the
system on.
2. If a caution appears, press the
OK screen button to proceed.
3. Press the DEST button.
4. Enter a destination.
See
for information on how to
enter a destination.
5. Press Save from the map
screen to add the current final
destination to the address book.
6. Press the Edit screen button
and then press the Change
Name field on the screen.
An alpha-keyboard displays.
Enter the name.
7. Press and hold one of the
for
screen buttons at the bottom
of the screen until the text in
the button changes.
The address book entry
name appears in that preset
destination screen button and
is now available to select from
the Select Destination screen.
See Using the Stored Preset
Destinations following to select
it as a destination.
See
for more information on how to
add preset destinations.