Table of Contents
Advertisement
Power bars and extension cords do not guarantee the required
safety of the appliance. Do not use these to connect the oven to the
power supply.
For safety reasons, only use the oven when it has been fully
installed.
This appliance must not be used in a non-stationary location (e.g.,
on a ship).
Risk of injury due to electric shock. Any contact with live
connections or tampering with the electrical or mechanical
components of the oven will endanger your safety and may lead to
appliance malfunctions.
Do not open the oven housing under any circumstances.
While the appliance is under warranty, repairs should only be
undertaken by a service technician authorized by Miele Customer
Service. Otherwise the warranty will be invalidated.
Miele can only guarantee the safety of the appliance when original
Miele parts are used. Faulty components must only be replaced with
genuine Miele parts.
If the oven is delivered without a power cord, a special cord must
be installed by a Miele authorized technician (see "Installation –
Electrical connection").
If the power cord is damaged, it must be replaced with a special
power cord by a Miele authorized technician (see "Installation –
Electrical connection").
During installation, maintenance, and repair work, e.g., if the oven
interior lighting is faulty, the oven must be completely disconnected
from the power supply (see "Frequently asked questions"). To ensure
this:
- The circuit breakers have been switched off, or
- the fuses of the electrical installation have been completely
removed, or
- the plug (if present) is removed from the outlet. To do this, pull the
plug not the cord.
IMPORTANT SAFETY INSTRUCTIONS
9
Advertisement
Table of Contents
