Table of Contents
Advertisement
IMPORTANT SAFETY INSTRUCTIONS
Risk of injury caused by steam. During cooking processes with
moisture injection and during the residual moisture evaporation
process, steam is produced, which can lead to severe scalding.
Never open the door when bursts of steam are being injected.
It is important that the temperature in the food being cooked is
evenly distributed and sufficiently high. You can ensure this by
stirring or turning the food.
Plastic containers which are not heat-resistant melt and may
ignite at high temperatures and can damage the oven.
Use only plastic containers that are suitable for use in an oven.
Follow the manufacturer's instructions.
Canning food and heating it up in closed containers results in an
increase in pressure which can cause them to explode. Do not use
cans for canning or reheating food.
Risk of injury from the open door. You could bang into the open
door or trip over it. Do not leave the door open unnecessarily.
The door can support a maximum load of 33 lbs (15 kg). Do not
lean or sit on an open door, or place heavy items on it. Make sure
that nothing gets trapped between the door and the oven
compartment. This could damage the oven.
The wireless roast probe antenna on the top right of the oven
interior is at risk of damage when sliding in accessories. When
sliding in accessories, take care not to bang them against the
wireless roast probe.
The wireless roast probe antenna on the top right of the oven
interior is at risk of damage when sliding the FlexiClips with wire rack
in at level 6. Only use the FlexiClips with wire rack at levels 1 to 5.
The following applies to stainless steel surfaces:
Adhesives will damage the coated stainless steel surface and
cause it to lose its dirt-repellent protective coating. Do not use sticky
notes, adhesive tape, or other types of adhesive on the stainless
steel surface.
14
Advertisement
Table of Contents
