Table of Contents
Advertisement
Problem
The sensor buttons or
the proximity sensor do
not respond.
Power failure -Program can-
celled
appears on the
display.
12:00
appears on the
display.
Maximum operating duration
reached
appears on the
display.
Frequently Asked Questions
Possible cause and solution
You have selected the
setting. When this is activated, the sensor buttons
Off
and proximity sensor do not respond when the oven
is turned off.
As soon as the oven is turned on, the sensor
buttons and the proximity sensor will respond. If
you want the sensor buttons and the proximity
sensor to respond even when the oven is turned
off, select the
The settings for the proximity sensor are turned off.
Change the settings for the proximity sensor by
selecting
Settings
The proximity sensor is defective.
Contact Miele Customer Service.
The oven is not connected to the domestic electrical
supply.
Make sure that the plug is correctly inserted in the
socket and that the socket switch has been
switched to on.
Check if the breaker has tripped. If it has, contact
a qualified electrician or Miele Customer Service.
If the display does not respond, there is a fault with
the controls.
Touch and hold the On/Off button until the
display turns off and the oven restarts.
There has been a brief power failure. This has caused
the current cooking process to stop.
Turn the oven off and then back on again.
Restart the cooking process.
There was a power failure for more than 150 hours.
Reset the date and time.
The oven has been operating for an unusually long
time. This has triggered the safety shut-off.
Confirm with OK.
The oven is now ready to use again.
Display
|
QuickTouch
Display
|
QuickTouch
|
Proximity sensor
|
|
On
setting.
.
101
Advertisement
Table of Contents
