Table of Contents
Advertisement
Type: The optional settings are: Not Installed; Auto; CD/DVD and ARMD
LBA/Large Mode: The optional settings are Auto; Disabled.
Disabled: Disables LBA Mode.
Auto: Enables LBA Mode if the device supports it and the device is not already
formatted with LBA Mode disabled.
Block (Multi-Sector Transfer): The optional settings are: Disabled and Auto.
Disabled: The Data transfer from and to the device occurs one sector at a time.
Auto: The Data transfer from and to the device occurs multiple sectors at a time if the
device supports it.
PIO Mode: the optional settings are: Auto, 0, 1, 2, 3 and 4.
DMA MODE: the optional settings are Auto, SWDMAn, MWDMAn , UDMAn.
This option allows you to enable the HDD S.M.A.R.T Capability
S.M.A.R.T.:
(Self-Monitoring, Analysis and Reporting Technology). The optional settings are Auto;
Disabled; and Enabled.
32 Bit Data Transfer: the optional settings are: Disabled and Enabled.
Floppy A
This item is for specific floppy disk drive settings. Select according to the specification
of the floppy disk you use.
System Memory
This item will show information about the memory modules(s) installed.
3-5
Advanced BIOS Features
Removable Drives
Use this item to specify the boot device priority sequence from available drives.
Quick Boot
Allows BIOS to skip certain tests while booting. This will decrease the needed to boot
the system.
st
1
Boot Device
Specify the boot sequence from the available devices. A device enclosed in
parenthesis has been disabled in corresponding type menu.
Boot Up NumLock Status
23
Advertisement
Table of Contents
