MZ3-V11
Controller/positioner for comfort ventilation
Functions
•
Positioner and controller for comfort ventilation with touch panel
•
Design according to Feller EDIZIOdue
•
Manual operation with up to 4 Levels, OFF, minimum air, 1st Level,
2nd Level, maximum air
•
AUTO operation: The controller activates the ventilation based on
controls curve. The controls curve may be adjusted
•
Automatic reset of the maximum air level
•
One 0...10 VDC controls output to control the ventilation system
•
One 0...10 VDC input to measure CO2 or other sensors
•
Password protected controls settings
•
New with V2.0: Copy of settings with accessory
Applications
This device is designed to control ventilation systems for comfort applications. For example, for well insulated residential
areas which are required to be ventilated.
General description
The MZ3-V11 is a microprocessor-controlled precision positioner and controller with touch panel. Through user and
engineering parameters the positioner may be configured to work for most of the standard ventilation applications. The
device is pre-configured according to this documentation. Settings such as switching levels of the control curve and
ventilation strengths for each Level may be adjusted. The configuration may be performed using the programming device
called OPA-S. This device may be used as well to visualize measuring values.
Ordering
Item
Item code
MZ3-V11-T4-W
40-100065
MZ3-V11-T4-S
40-100066
MZ3-V11-B1-T4-W
40-100213
MZ3-V11-B-T4-W
40-100209
OPA-S
40-500006
AEC-PM2
40-500130
Interface to the ventilation system
The positioner works with all ventilation systems that are designed with a 0...10 VDC or 2...10 VDC input signal.
Selection of transmitters
The positioner works with all sensors that provide an output signal of 0...10 VDC or 2...10 VDC. The measuring range
needs to be observed.
For example: CO2 0...2000 ppm = 0...10 VDC or 2...10 VDC.
Doc: 70-00-0563 V2.2, 20210419
Subject to alterations
®
Variant
Green LED
White frame, Without lettering
Green LED
Black frame
Without lettering
Blue LED
White frame
Lettering: Minimum, Level I, Level II, Maximum
Blue LED
White frame
Lettering: Minimum, Normal, Maximum, Party
Programming and display device
Memory-Device. Used for copying settings
© Vector Controls GmbH, Switzerland
www.vectorcontrols.com
MZ3-V11
Features
Compact positioner/controller
in a Feller EDIZIOdue®
frame, with each one 0-10
VDC in- and output for CO2
sensor.
Operation as 4-Level switch
with touch panel and AUTO
function.
LCD display for surface
mounting or handheld
operation.
Stores settings of MZ3
Page 1