During Operation; Using The Blower; After Finishing Work; Preparing For Transportation Or Storage - Stihl BGA 86 Instruction Manual

English
► Insert the battery and hold the blower firmly with one hand
on the control handle. While pushing the retaining latch
forward, squeeze the trigger switch with your index finger.
The blower should switch on. If it does not, switch on, or if
it does not shut off when you release the trigger switch,
take the blower to an authorized STIHL servicing dealer to
be repaired before use.

17 During Operation

17.1 Using the Blower

WARNING
Always wear proper clothing and protective apparel,
including proper eye protection, @ 5.4. Never direct the air
flow toward bystanders. Keep bystanders at least 17 ft.
(5 m) away from the work area, @ 5.6.4. Work carefully and
maintain proper control of the blower.
The blower is designed for single-handed operation with
either the right or left hand.
► Hold the unit firmly with your hand, keeping the handle
cradled between your thumb and fingers.
► Direct the air flow at the edges of the pile of material to be
blown.
NOTICE
Never direct the air flow toward objects such as vehicles or
windows.
22
Observe all applicable laws, regulations, standards and
ordinances.

18 After Finishing Work

18.1 Preparing for Transportation or Storage

WARNING
To reduce the risk of personal injury from unintended
activation or unauthorized use, switch off the motor and
remove the battery before transporting the blower or putting
it down.
To prepare the blower for transportation or storage:
► Switch off the blower, @ 15.2.
► Remove the battery, @ 14.2.
► If the battery or blower became wet during operation,
allow them to dry separately and completely before
charging or storing.

19 Transporting the Blower and Battery

19.1 Blower

When transporting the blower:
17 During Operation
0458-824-8221-A