Easy Exit Seat - Chevrolet 2006 Corvette Owner's Manual

Easy Exit Seat

Two personalized exit positions can also be programmed
to allow for an easy exit or entry into the vehicle. The
controls for this memory function are located on the
driver's door.
B
(Easy Exit Seat): This button is used to program
and recall the desired driver's seat exit position.
To program an exit position, use the following steps:
1. Recall the desired driving position by pressing
button 1 or 2.
The seat will move to the programmed memory
position.
2. Position the seat and the telescopic steering
column position to a comfortable exit position.
3. Press and hold the exit button until two beeps
sound.
Your exit position is now programmed.
A second exit position can be programmed by repeating
the above steps and pressing the other memory button.
2-74
To recall an exit position, do one of the following:
•
If you have an automatic transmission vehicle,
press and release the exit button while the vehicle
is in PARK (P).
One beep will sound and the exit position for the
currently identified driver will be recalled.
•
If you have a manual transmission vehicle, press and
release the exit button. The parking brake needs to
be set to recall the memory position.
One beep will sound and the exit position for the
currently identified driver will be recalled.
If your vehicle has the Auto Exit Recall feature and it is
turned on in the DIC, automatic seat and telescopic
steering column movement to the exit position will occur
when you use the keyless access transmitter to unlock
your vehicle or when you turn the engine off and open the
driver's door. See "Auto Exit Recall" under DIC Vehicle
Personalization on page 3-68 for more information.