Chevrolet 2006 Corvette Owner's Manual page 133

Hide thumbs Also See for 2006 Corvette:
Table of Contents

Advertisement

3. Locate the pressure release bolt on the front side of
the hydraulic pump.
4. Use the wrench, located in the glove box, and
turn the pressure release bolt counterclockwise
one revolution, to relieve pressure to the hydraulic
pump. This will allow you to manually raise the
convertible top.
5. Then follow the steps under raising the manual
convertible top. See "Convertible Top (Manual)"
under Convertible Top (Manual) on page 2-60
or Convertible Top (Power) on page 2-67.
When power is restored to the vehicle, the hydraulic bolt
must be tightened, by turning it clockwise. The power
convertible top button can then be used to lower or raise
the convertible top.
If the power convertible top is operated multiple times,
the engine should be running to prevent drain on
the vehicle's battery. Under certain conditions,
the Driver Information Center (DIC) may display a
message regarding the power top. See DIC Warnings
and Messages on page 3-53 for more information.
If the battery has been disconnected, the power
windows must be initialized for the power top to
operate. See Power Windows on page 2-17 for
more information.
2-71

Advertisement

Table of Contents
loading

Table of Contents