Table of Contents
Advertisement
Four-Wheel-Drive Vehicles
If your vehicle is equipped with StabiliTrak
designed to be dolly towed. If you need to tow your
vehicle, see "Dinghy Towing" earlier in this section.
If your vehicle is not equipped with StabiliTrak
following procedure to tow your vehicle:
1. Drive the vehicle up onto the tow dolly.
2. Shift the transmission to PARK (P).
3. Turn the engine off, but leave the ignition on.
4-60
4. Firmly set the parking brake.
5. Securely attach the vehicle being towed to the
®
it is not
tow dolly.
{
Shifting a four-wheel-drive vehicle's transfer
case into NEUTRAL can cause your vehicle to
roll even if the transmission is in PARK (P).
You or others could be injured. Make sure the
parking brake is firmly set before you shift the
transfer case to NEUTRAL.
6. Shift the transfer case to NEUTRAL. See
Four-Wheel Drive on page 2-27 for the proper
procedure to select the NEUTRAL position for
your vehicle.
7. Release the parking brake only after the vehicle
being towed is firmly attached to the towing
®
vehicle.
, use the
8. Turn the ignition off and lock the steering column.
CAUTION:
Advertisement
Chapters
Table of Contents
