Replacing The Bench Seat - Chevrolet 2005 Tahoe Owner's Manual

4. Squeeze the release lever, located in the lower
middle to unlatch the seat from the floor while
pulling the seat out.
5. While holding the rear of the seat up, roll the seat
out of the vehicle.
1-18
3. To unlatch the seat
from the floor, pull up
on the release lever
labeled 2, located at the
rear of the seat, and lift
the rear of the seat up
off the floor.

Replacing the Bench Seat

CAUTION:
{
If the seatback is not locked, it could move
forward in a sudden stop or crash. That could
cause injury to the person sitting there. Always
press rearward on the seatback to be sure it
is locked.
CAUTION:
{
A seat that is not locked into place properly
can move around in a collision or sudden stop.
People in the vehicle could be injured. Be sure
to lock the seat into place properly when
installing it.