Service Ride Control; Service Tire Monitor; Service Stability - Chevrolet 2005 Tahoe Owner's Manual

SERVICE RIDE CONTROL

If a problem occurs with the suspension system,
this message will appear on the DIC. If the message
appears turn off the vehicle. Restart the vehicle and
check for the message on the DIC display. If the
message is still displayed or appears again when you
begin driving, the ride control needs service. See your
GM dealer. Pressing any of the four DIC buttons,
if equipped, will acknowledge the message and clear it
from the DIC display. If your vehicle is not equipped
with the four DIC buttons, pressing the trip odometer
reset stem will acknowledge the message and clear it
from the DIC display.

SERVICE STABILITY

If you ever see the SERVICE STABILITY message,
it means there may be a problem with your StabiliTrak
system. If you see this message, try to reset the system.
Stop; turn off the engine; then start the engine again.
If the SERVICE STABILITY message still comes on,
it means there is a problem. You should see your
GM dealer for service. The vehicle is safe to drive,
however, you do not have the benefit of StabiliTrak
so reduce your speed and drive accordingly.
3-66
Pressing any of the four DIC buttons, if equipped,
will acknowledge the message and clear it from the
DIC display. If your vehicle is not equipped with the
four DIC buttons, pressing the trip odometer reset stem
will acknowledge the message and clear it from the
DIC display.

SERVICE TIRE MONITOR

If your vehicle is equipped with the Tire Pressure
Monitor System, this message will be displayed if one or
more of the tire monitor sensors have malfunctioned
or if all of the tire monitor sensors have not been
programmed successfully. See your GM dealer.
Pressing any of the four DIC buttons, if equipped,
will acknowledge the message and clear it from
the DIC display. If your vehicle is not equipped with the
four DIC buttons, pressing the trip odometer reset
®
stem will acknowledge the message and clear it from
the DIC display. The message will reappear at each
ignition cycle until the system has been serviced.
®
,