Table of Contents
Advertisement
Problem
In auxiliary mode, the
picture moves or scrolls.
The language in the
audio or on the screen
is wrong.
The remote control does
not work.
3-128
Recommended Action
Check the auxiliary input
connections at both devices.
Change the Video Format to
PAL or NTSC. See "Stereo
RCA Jacks" previously
for how to change the
video format.
Check the audio or
language selection in the
main DVD menu.
Check to make sure there is
no obstruction between the
remote control and the
transmitter window.
Check the batteries to make
sure they are not dead or
installed incorrectly.
The parental control button
might have been turned on.
The power indicator light
will flash.
Problem
After stopping the
player, I push Play but
sometimes the DVD
starts where I left off
and sometimes at the
beginning.
The auxiliary source is
running but there is no
picture or sound.
My disc is stuck in the
player. The Load/Eject
button does not work.
Recommended Action
If the stop button was
pressed one time, the DVD
player will resume playing
where the DVD was
stopped. If the stop button
was pressed two times the
DVD player will begin to
play from the beginning of
the DVD.
Check that the DVD
player is in the auxiliary
source mode.
Check the auxiliary input
connections at both
devices.
Turn the DVD power off,
then on, then press the
load/eject button on the
DVD player.
Do not attempt to forcibly
remove the disc from the
DVD player. This could
permanently damage the
disc and DVD player.
Advertisement
Chapters
Table of Contents
