Table of Contents
Advertisement
Quick Links
EEI –2787
DESK
Thank you for purchasing the MODWAY DESK！
Before you start, here is some helpful advice:
1.We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step
instructions.
2.Owing to the size and weight of the desk, we recommend that it is assembled by two adults, on a carpeted or
padded area, in the room that it is intended for. Approximate assembly time: 45 minutes.
3.Please do not use any tools other than those provided or recommended in these instructions.
4.Please do not throw away any of the packaging or the instruction until you have checked all the components and
hardware and the furniture is fully assembled. Please ensure that the packaging is disposed of in a safe and
environmentally friendly way.
5.Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten the
components from time to time, so please save the tools that have been provided.
6.Please keep all fitting out of reach of children.
Components:
3
1
Desk Top
x1
5
Cube Left
x1
Customer Service 908-368-1025︱www.modwayfurniture.com
1
2
2
3
4
3
2
Rail
x2
6
Cube Right
x1
Hardware:
A
B
C
D
E
F
G
6
5
8
4
3
3
Leg
x4
7
Cube Top
x1
Long Bolt M6x12mm
Short Bolt M4x6mm
Small Nut
Long Screw M4x14mm
Short Screw M4x12mm
Adjustable leveler
Allen Wrench M4
Phillips Head Screwdriver
( Not included)
7
6
4
Stretcher
8
Cube Bottom
Page 1 of 5
x16
x6
x6
x24
x2
x4
x1
x2
x1
Advertisement
Table of Contents
Related Manuals for modway EEI –2787
Summary of Contents for modway EEI –2787
- Page 1 EEI –2787 DESK Thank you for purchasing the MODWAY DESK！ Before you start, here is some helpful advice: 1.We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step instructions. 2.Owing to the size and weight of the desk, we recommend that it is assembled by two adults, on a carpeted or padded area, in the room that it is intended for.
- Page 2 EEI –2787 DESK STEP 1: Put Cube Left (5), Cube Right (6), Cube Top (7), and Cube Bottom (8) together on a carpeted or padded surface as shown. Attach them by using 6 pieces of Small Bolt (B), 6 pieces of Small Nut (C) , and 4 pieces of Short Screw (E). Hold Small Nut (C) by hand, then use Phillips Head Screwdriver (Not provided) to tighten Small Bolt (B) clockwise until secure.
- Page 3 EEI –2787 DESK STEP 3: Put the assembled Cube to the assembled Desk Top (1) and Rails (2) as shown. Place the remaining Rail (2) to the bottom of Table Top (1). Attach them by using 12 pieces of Long Screw (D). Use Phillips Head Screwdriver (Not provide) to tighten Long Screws (D) clockwise until secure.
- Page 4 EEI –2787 DESK STEP 5: Insert the assembled Legs (3) and Stretcher (4) to the assembled Table Top (1), Rails (2), and Cube as shown. Insert 8 pieces of Bolt (A) into the pre-drilled holes on Rail (2) to secure the assembled Legs (3) and Stretcher (4). Use Allen Wrench (G) to tighten all Bolts (A) clockwise until secure.
- Page 5 EEI –2787 DESK STEP 7: Carefully turn over the assembled desk. If leveling is needed, turn Leveler (F) clockwise to down and counterclockwise to raise. Assembly is complete. Your desk is ready to be used now! Customer Service 908-368-1025︱www.modwayfurniture.com Page 5 of 5...
Need help?
Do you have a question about the EEI –2787 and is the answer not in the manual?
Questions and answers