Alarm signals processing mode
Main power supply
Backup power
Supported battery type
Recommended battery type
Detector power supply
Protection against dismantling
Radio signal frequency band
Compatibility
Maximum RF output power
Radio signal range
Operating temperature range
Operating humidity
Dimensions
Weight
Complete Set
1. MultiTransmitter
2. Power cable
3. 12 V battery connection cable
4. Installation kit
5. Body
. Quick Start Guide
Pulsed or bistable
110–255 V, 50/60 Hz
12 V DC
12 V battery with a full charge cycle of up to 30
hours. The maximum battery size for installation
in the body is 150 × 64 × 94 mm
12V battery with a capacity of 4 or 7 A⋅h
12 V DC, up to 1 A total for all detector power
supply outputs
Tamper
868.0–868.6 MHz or 868.7–869.2 MHz,
depending on the sales region
Operates only with all Ajax
extenders
Up to 7.29 mW (25 mW limit)
Up to 2,000 m (any obstacles absent)
From −10°С to +40°С
Up to 75%
196 × 238 × 100 mm
805 g
hubs
range
, and
Need help?
Do you have a question about the MultiTransmitter and is the answer not in the manual?
Questions and answers