AJAX MultiTransmitter User Manual page 13

1. Go to the Devices tab
2. Select MultiTransmitter from the list.
3. Go to Settings by clicking on the
Note that after changing the settings, you should click the Back button to save them.
Setting
First field
Room
Alert with a siren, if power supply for detectors is
shorted out
Jeweller Signal Strength Test
Attenuation Test
Temporary Deactivation
.
icon.
Integration module name that can be edited. The
name of the device is displayed in the text of SMS
and notifications in the event feed.
The name can contain up to 12 Cyrillic characters
or up to 24 Latin symbols
Selecting the virtual room to which
MultiTransmitter is assigned. The room name is
displayed in the text of SMS and notifications in
the event feed
When enabled, sirens connected to the security
system signal if detectors power line is shorted
out
Switches the integration module to the Jeweller
signal strength test mode. The test allows you to
check the signal strength between the hub and
MultiTransmitter and determine the optimal
installation location
What is Jeweller Signal Strength Test
Switches MultiTransmitter to the signal
attenuation test mode
What is signal attenuation test
Allows the user to disconnect the device without
removing it from the system.
Value