Advertisement
Available languages
Available languages
12. Square the back of the glide & secure with 3/4 in. screws.
13. From the inside of the glide bracket, measure across 24 in. & mark the
location on the underside of the front rail.
14. Align the inside of the 2nd glide bracket with the mark & mark the screw
hole location.
15. Secure the glide with 3/4 in. screws.
16. Square the back of the glide & secure with 3/4 in. screws.
STEP 2 - Attaching The Basket
1.
Re-attach slides.
2.
Insert plastic clips into glide.
3.
Rotate clip & push top to snap clip into lock position.
4.
Repeat at all clip locations.
5.
Fully extend 1 glide.
6.
Place basket onto clips (using 2nd horizontal bar).
7.
Fully extend 2nd glide & place basket onto clips (using 2nd horizontal bar).
8.
Move basket in & out to ensure glides move freely & are locking into place.
3
Advertisement
